Table of Contents
Advertisement
Quick Links
Disc
The disc inserted in the front cover contains the user manual of the models Bredel 10,
Bredel 15 and Bredel 20. The user manual is available in the following languages:
The disc also contains quick-reference instructions for the replacement of the pump
hose. This replacement instruction is only for users that are familiar with the
replacement procedures in the user manual.
How to use the disc
1
Put the disc in the disc drive.
2
Close the disc drive.
The disc will start automatically.
3
Wait until the various language versions appear on screen.
4
Select the required language (click 1x with the left mouse button).
The PDF reader program will automatically start and the required user manual
appears on screen.
Shortcuts
In the left margin you will find the various chapters and paragraphs. These can be
accessed directly by clicking on the required chapter or paragraph.
In the text you will find hyperlinks to chapters or paragraphs. These hyperlinks are linked
with the required chapters or paragraphs. By clicking a shortcut the required chapter or
paragraph appears on screen.
System requirements
The program on the disc requires a PC with the following minimum system
requirements:
•
Disc drive
The following software must be installed on the PC:
•
PDF reader program
•
An Internet browser
1
Advertisement
Table of Contents
Related Manuals for Bredel 10
Summarization of Contents
Disc Usage
Disc Navigation and Requirements
How to use the disc, system requirements, and shortcuts.
General Information
Manual Usage and Support
Guidance on using the manual and contacting Bredel for assistance.
Safety
Safety Symbols, Intended Use, and ATEX
Explains safety symbols, intended applications, and ATEX compliance.
User Responsibilities and Regulations
Outlines user duties, qualifications, and adherence to safety regulations.
Warranty
Warranty Terms and Exclusions
Covers the manufacturer's warranty policy, coverage, and claim procedures.
Description
Product and Component Identification
Guides on identifying pump parts via labels and plates.
Pump Construction and Operation
Details the mechanical structure and working principle of the hose pump.
Pump Hose Details
Discusses pump hose construction, materials, selection, and compression.
Lubrication and Gearbox
Covers pump lubrication, cooling, and gearbox specifications.
Motor, VFD, and Options
Information on the electric motor, frequency controller, and available pump options.
Installation
Installation Site and Preparation
Guides on unpacking, inspection, environmental conditions, and pump placement.
Pipework Installation
Advice on suction and discharge pipework, including bends and materials.
Frequency Controller Installation
Key warnings and precautions for installing the VFD.
Pump Handling and Anchoring
Instructions for safely lifting, moving, and anchoring the pump.
Commissioning
Commissioning Steps and Checks
Safety checks and procedures for starting up and verifying pump operation.
Maintenance
General Maintenance and Safety
Safety warnings and general advice for pump maintenance tasks.
Scheduled Maintenance Tasks
Outlines the routine maintenance schedule and inspection points.
Hose Cleaning and ATEX Maintenance
Procedures for cleaning the pump hose and special maintenance for ATEX environments.
Lubricant Change and Hose Removal
Guides for lubricant replacement and pump hose removal.
Pump Head Cleaning and Hose Fitting
Steps for cleaning the pump head and installing a new hose.
Component Replacement (Rotor, Bearings, Seal)
Instructions for replacing key internal pump components.
Pump Reassembly
Steps for reassembling the pump after component replacement.
Optional Features
Optional Float Switch Installation
Guide for installing the high-level float switch option.
Optional Revolution Counter Installation
Guide for installing the revolution counter sensor option.
Storage
Storage Guidelines
Advice on storing the pump and hose to prevent damage and aging.
Troubleshooting
Failure to Operate Diagnosis
Diagnoses and corrects issues related to the pump not starting.
Troubleshooting: High Temperature
Identifies causes and solutions for excessive pump temperature.
Troubleshooting: Low Capacity/Pressure
Addresses and resolves issues causing reduced pump output.
Troubleshooting: Vibration and Hose Life
Diagnoses vibration causes and factors affecting hose lifespan.
Troubleshooting: Leaks and Hose Issues
Solves problems like hose pulling, lubricant leaks, and buffer zone leaks.
Hazardous Environments (ATEX)
ATEX Compliance and Component ID
Explains ATEX compliance and identification of ATEX-rated pump parts.
ATEX Component Requirements
Details ATEX selection criteria for gearbox, motor, and frequency controller.
Specifications
Performance Specifications
Provides key performance metrics like capacity, temperatures, and pressures.
Materials and Surface Treatment
Lists the materials used in pump construction and details surface finishes.
Lubricant and Weight Specs
Details lubricant requirements and component weights.
Torque Figures and Gearbox Specs
Lists torque values for fasteners and gearbox technical details.
Motor and VFD Specs
Provides specifications for the electric motor and optional VFD.
Parts List Overview
Introduces the parts list with a diagram and references to detailed sections.
Pump Head Parts List
Detailed breakdown and part numbers for the pump head assembly.
Nipple Assembly Parts
Detailed breakdown and part numbers for nipple assemblies.
Threaded Nipple Parts
Detailed breakdown and part numbers for threaded nipple assemblies.
Flange Assembly Parts (1)
Detailed breakdown and part numbers for the first flange assembly type.
Flange Assembly Parts (2)
Detailed breakdown and part numbers for the second flange assembly type.
Counter and Lubricant Parts
Lists parts for revolution counter and lubricant details.
Need help?
Do you have a question about the 10 and is the answer not in the manual?
Questions and answers