Door Panels And Cabinetry Clearance - Dacor EF42DBSS Installation Instructions Manual

Door Panels and Cabinetry Clearance - IF42/IF48 Series Models
The custom door panels and adjacent cabinetry for models series IF42 and IF48 must be designed so that there is sufficient clearance
for the doors to swing open. If the refrigerator is to be installed close to the wall, see Door Swing 90° on facing page.
Refrigerator to
Cabinetry Clearance
Door swing 110° actual size
NOTE: For IF series models, rout the
hinge side of the custom door panels
to a radius that is equal to at least half
the thickness of the panel if a 130°
door swing is desired. See Adjust
Doors.
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
8
Installation Requirements
110˚ door
stop position
Refrigerator
side trim
Cabinetry
Hinge
/ " (6.35 mm)
1
4
/ " (1.3 cm)
1
2
/ " (1.9 cm)
3
4
1" (2.5 cm)
Spacer panel