Connect the AC cord plug to the TV Set:
Connect the AC power cord plug to the "AC IN" jack, Connect the other side
plug to the Wall Outlet. Press the Power switch"
the set on.
3. Turn on the TV Set
When turn on the TV Set, the Power Indicator " LED " will flicker. Then
terminate to Turn on or standby state.
Power Indicator: Blue(Turn On)
Power Indicator: Orange(standby)
The screen below is displayed for a while after the Plasma TV is turned on. At
TV state, user can see TV program or Snowy Picture.
No TV program can see Snowy Picture or blue screen. (User can setup)
If the Power Indicator is orange, user can press the "
controls or "POWER" key on the Remote Control Transmitter.
4. Remote Control Transmitter Setup
① Slide off the battery cover
② Insert batteries
Note correct polarity (+and -).
③ Replace the cover
• Make sure that the batteries are fitted the
correct way round.
• Do not mix different battery types,i.e.Alkaline
and Manganese or use rechargeable (Ni -
5. Front panel controls
Cad)batteries.
View from back of the TV set
5
○
"on the Plasma TV to turn
" key on the Front panel