Related Manuals for K&S BASIC KSB 35i
Summarization of Contents
INTRODUCTION
Manual Scope and Environmental Consideration
Manual provides essential information, with a shorter print version to save paper. Full version available online.
SAFETY INFORMATION
General Safety Precautions
Do not use in poor ventilation, humidity, rain, snow, direct sunlight. Keep away from flammable liquids.
Electrical Safety Precautions
Generator produces electricity; follow precautions to avoid electric shock and operate safely.
GASOLINE GENERATOR PRECAUTIONS
Fuel Handling and Operation Safety
Disconnect load before stopping. Use unleaded gasoline. Plan emergency stop. Prevent leakage.
SPECIFICATIONS
Model Technical Specifications
Detailed specifications for different KSB models including power, engine, dimensions, and more.
MAIN OVERVIEW
Component Identification
Identifies key external components for different KSB generator models like handles, panels, and outlets.
Control Panel Features
Details functions of indicators, switches, outlets, and protective devices on the control panel.
TERMS OF USE AND OPERATION
Grounding and Consumer Load Considerations
Ground generator for safety. Consider consumer types and inrush current for proper operation.
Cooling Vent Blockage Warning
Ensure cooling vents are clear of debris to prevent engine or inverter damage.
Engine Switch and Warning Lights
Operation of engine switch and function of oil warning and overload indicator lights.
WORKING WITH THE DEVICE
Indicator Lights, Protectors, and ECON Switch
Explains AC pilot, DC protector, overload indicator, and ECON switch functions and handling.
Fuel System Operation and Grounding
Operation of fuel tank vent knob, ground terminal, and safety for fuel system.
BEFORE STARTING
Pre-Start Checks: Fuel, Oil, and Environment
Check fuel/oil levels. Ensure optimal atmospheric conditions for generator performance.
Generator Capacity and Operating Limits
Generator capacity, load connection before starting, and operating time limits.
ENGINE START AND STOP
Starting Procedure and Pre-Start Setup
Steps for starting engine using manual/electric starter, choke, and fuel valve.
Post-Start Idle and Load Connection
Allow engine to idle for warm-up. Connect devices carefully after 1-2 minutes.
Stopping Procedure
Steps to safely shut down the generator, including idling and disconnecting devices.
COMMISSIONING AND AC OPERATION
Initial Operation and Grounding for AC
Commissioning limits (50% load), oil change, and grounding requirements for AC operation.
AC Connection and Device Management
Connecting devices to AC, managing loads with ECON, and checking indicator lights.
BATTERY CHARGING
Lithium Battery Charging Procedure and Safety
Steps for charging lithium batteries, including starter issues, DC protector, and safety.
BATTERY CHARGING SAFETY
Charging Safety, DC Protector, and Current Limits
ECON OFF for charging. Secure connections. Avoid sparks. DC protector and current limits.
TECHNICAL MAINTENANCE SCHEDULE
Maintenance Tasks and Intervals Overview
Table detailing service types for motor oil, air filter, spark plug, fuel tank, and fuel filter.
Servicing Safety and Oil Recommendations
Safety during servicing and recommended engine oil types and viscosity.
MOTOR OIL AND AIR FILTER MAINTENANCE
Oil Change and Air Filter Cleaning Procedures
Procedures for draining engine oil and cleaning the air filter element.
SPARK PLUG AND FUEL FILTER MAINTENANCE
Spark Plug Inspection and Fuel Filter Cleaning
Steps for inspecting spark plug gap and cleaning the fuel filter.
MUFFLER SCREEN AND FUEL TANK FILTER MAINTENANCE
Muffler Screen Cleaning and Fuel Tank Filter Care
Cleaning muffler screen/arrester and fuel tank filter.
Spark Arrester Alignment and Fuel Safety
Tip for aligning spark arrester and safety precautions for fuel handling.
GENERATOR STORAGE AND TRANSPORTATION
Storage Preparation and Guidelines
Guidelines for storing the generator and preparing for long-term storage.
Transportation Safety and Methods
Safe methods for transporting the generator using packaging and proper lifting.
WARRANTY AND DISPOSAL
Warranty Terms and Claims Process
Details warranty period, claims process, and required documentation.
Environmental Disposal and Recycling
Requirements for separating and recycling generator and battery waste.
CONTACT INFORMATION
Regional Contact Details
Contact information for DIMAX International in Germany, Poland, Ukraine, and Russia.
Need help?
Do you have a question about the KSB 35i and is the answer not in the manual?
Questions and answers