Error Message & Possible Solution; Appendix; Specifications - AOC 223VW User Manual

ERROR MESSAGE & POSSIBLE SOLUTION
NO SIGNAL
1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector's screws.
2. Check the signal-cable's connection pins for damage.
INPUT NOT SUPPORT
Your computer has been set to unsuitable display mode ,set the computer to
display mode given in the following table.

APPENDIX

SPECIFICATIONS

Driving system TFT Color LCD
LCD Panel
Size
Pixel Pitch
Video
55.8cm(22")
0.282mm(H) × 0.282mm(V)
R,G,B Analog Interface
Digital Interface
18