Related Manuals for Taarup 4036
Summarization of Contents
Technical Data and Specifications
Technical Data
Conversion table for SI-units and machine specifications.
Fitting to the Tractor
Instructions for connecting the machine to the tractor.
Machine Identification
Machine Identification
Locating and recording the machine number and manufacturer.
Introduction
Introduction to Taarup Machines
Welcome message and overview of Taarup machines.
Safety Information
General Safety Instructions
Essential safety precautions for operating agricultural machinery.
Supplemental Safety Instructions
Additional safety guidelines and warnings for specific operations.
Safety During Crane Lift
Procedures for safely lifting and handling the machine with a crane.
New Machine Setup
New Machine: Be Careful
Precautions and checks before operating a new machine.
Technical Description and Function
Technical Description
Detailed breakdown of machine components and their purpose.
Machine Functionality
Explanation of how the machine operates and its capabilities.
Mounting - Swivel Hitch
Checking Gearbox and PTO Selection
Verifying gearbox suitability and selecting PTO speed.
Coupling with Tractor Lift Arms
Step-by-step guide for attaching the machine to the tractor.
Mounting - Wide Angle Shaft
Checking Gearbox
Verifying the correct gearbox for the wide-angle hitch.
Tractor Drawbar Adjustment
Proper fitting and adjustment of the tractor drawbar.
Drawbar Height Adjustment
Setting the drawbar height for optimal PTO shaft alignment.
Operation and Adjustment
Cutting Height Adjustment
How to adjust the cutting height using the screw adjuster.
Spring Suspension Adjustment
Setting the balancing springs for optimal ground contour following.
Optional Equipment
Balancing Weight
Use of counterbalance weights for stability in hilly terrain.
High Cut Skids
Fitting skids for operation in stony or uneven ground.
Maintenance
Knives and Cutting Discs
Daily checks and maintenance for cutting components.
Cutting Disc Installation
Proper fitting and torque for cutting discs and bolts.
Lubrication
Lubrication Schedule
Intervals and points for machine lubrication.
Lubrication Points
Identification of specific lubrication points on the machine.
Directions for Repair
Main Gearbox Repair
Procedures for repairing the main gearbox.
Problem/Fault Analysis and Correction
Troubleshooting Uneven Stubble
Identifying causes and solutions for uneven stubble.
Troubleshooting Uneven Swath
Diagnosing and fixing issues related to uneven swath formation.
Winter Storage
Pre-Winter Storage Procedure
Steps for preparing the machine for storage during winter.
Scrapping of Machines
Proper Machine Disposal
Guidelines for environmentally safe scrapping and recycling.
Need help?
Do you have a question about the 4036 and is the answer not in the manual?
Questions and answers