Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Spearhead MULTICUT 200
Summarization of Contents
Important Information
Warranty Registration Verification
Details dealer's role in machine registration and warranty validity.
Customer/Owner Note
Advises owners to ensure warranty registration is complete and about initial machine bedding-in.
Hydraulic Fitting Torque Settings
Provides torque specifications for hydraulic hose ends and port adaptors.
Warranty Policy
Warranty Registration
Mandates dealer registration before delivery and buyer verification.
Limited Warranties
Outlines warranty periods for machines and spare parts, and conditions.
Warranty Claims and Limitations
Remedies and Procedures
Describes the process for reporting faults, submitting claims, and repair timelines.
Limitation of Liability
States manufacturer's disclaimers on implied warranties and liability caps.
Miscellaneous Warranty Terms
Covers waiver of terms and enforceability of provisions.
Important Safety
General Safety Precautions
Lists critical safety rules for operating the machine, including bystander safety and maintenance.
Installing Your Machine: Introduction
Introduction
Briefly introduces the Multicut cutters and the manual's importance.
Safety First During Installation
Emphasizes understanding operation and safety before starting installation.
Tractor Requirements for Installation
Specifies minimum tractor horsepower, linkage type, and stability.
Installing Your Machine: Attachment
Attaching To The Tractor
Details fitting the machine to the tractor, including linkage and PTO connection.
Installing Your Machine: PTO Shaft
Determining Correct PTO Shaft Length
Guides on measuring and adjusting the PTO shaft length for safe operation.
Installing Your Machine: PTO Shaft Adjustment
PTO Shaft Adjustment Procedures
Provides step-by-step instructions for shortening PTO tubes and reassembling guards.
Setting Up and Adjustment
Cutting Height Adjustment
Explains how to adjust cutting height using the wheel and setting machine level.
Machine Protection (Slip Clutch)
Details the slip clutch function for gearbox protection and cautions against tampering.
Operation and Transportation
Operating the Machine
Covers safe PTO engagement, operating speed, and handling on terrain.
Transportation Guidelines
Advises on adhering to highway regulations and secure towing practices.
Servicing and Maintenance: Initial Checks
Pre-Operation Safety Checks
Lists essential safety checks before first operation and initial hours.
Torque Settings
Provides recommended maximum torque settings for various bolts and nuts.
Servicing and Maintenance: Regular Checks
Daily and 8-Hour Checks
Outlines lubrication and inspection tasks required daily or every 8 hours.
20-Hour Checks
Specifies lubrication tasks for PTO components every 20 hours.
Regular Maintenance Checks
Details regular inspections for debris, seals, and critical bolts.
Servicing and Maintenance: Components
Blade Maintenance and Replacement
Covers re-sharpening, balancing, and replacing blades and bushes safely.
Optional Chain Kit
Describes the use of the optional chain kit for stony conditions.
Skid Maintenance
Advises on skid wear on abrasive soils and debris buildup in wet conditions.
Servicing and Maintenance: Storage
Machine Storage Procedures
Details how to wash, grease, and store the machine properly.
Post-Storage Checks
Explains checks for slip clutch plates and general maintenance after storage.
Troubleshooting Guide
Broken or Damaged Blades
Lists causes and solutions for blade issues like striking ground or obstacles.
Damaged Blade Holder
Identifies common causes for blade holder damage, such as loose retaining nuts.
Gearbox Damage Issues
Outlines potential causes for gearbox damage, including slip clutch seizure and improper drive engagement.
PTO Shaft Damage
Lists factors leading to PTO shaft damage, such as bottoming out or incorrect overlap.
Slip Clutches Overheating
Explains reasons for slip clutch overheating, including overload and incorrect settings.
Oil Leak From Gearbox
Identifies potential causes for gearbox oil leaks, such as damaged seals or incorrect levels.
Metal Fatigue On Frame
Discusses factors contributing to frame fatigue, like excessive speed or improper operation.
Excessive Skid Wear
Suggests solutions for excessive skid wear, like fitting optional wheel kits.
Need help?
Do you have a question about the MULTICUT 200 and is the answer not in the manual?
Questions and answers