Cisco Catalyst WS-C3750X-48 Getting Started Manual

Catalyst 3750-X and 3560-X Switch
Getting Started Guide
•
•
•
•
•
•
•
•
•
•
•
•

About this Guide

This guide describes how to use Express Setup to initially configure your Catalyst switch. It also covers
switch management options, basic rack-mounting, stacking, port and module connections, and
troubleshooting.
For more installation and configuration information, see the Catalyst 3750-X and 3560-X documentation
on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and
documentation updates, see the release notes on Cisco.com.
When using the online publications, refer to the documents that match the Cisco IOS software version
running on the switch.
For translations of the warnings that appear in this publication, see the Regulatory Compliance and
Safety Information for the Catalyst 3750-X and 3560-X Switches on Cisco.com.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
About this Guide, page 1
Box Contents, page 2
Running Express Setup, page 3
Managing the Switch, page 8
Installing the Switch, page 10
Securing the AC Power Cord (Optional), page 14
Connecting the StackWise Cables (Catalyst 3750-X Switch), page 14
Connecting the StackPower Cables (Catalyst 3750-X Switch), page 15
Installing the Network Module (Optional), page 16
Connecting the Switch Ports, page 17
Troubleshooting, page 19
Obtaining Documentation and Submitting a Service Request, page 20