Related Manuals for Detnov CCD-040
Summarization of Contents
1. Introduction
1.1. About this manual
Introduces the CCD-020/040 series control panels and the manual's purpose.
1.2. European Standards
Details CE marking and compliance with EU directives and waste management.
1.3. Explicit definitions
Explains the classification of warnings (WARNING!, CAUTION, NOTE) used in the manual.
1.4. Characteristics of the control panel
Lists key features of the CCD-020/040 series control panels.
1.5. Inventory
Lists included items and checks to perform before installation.
1.6. Damage to the unit
Provides instructions for handling damaged units or missing accessories.
1.7. Requirements
1.7.1. Assembly notes
Details knowledge and tools required for control panel assembly.
1.7.2. Installation notes
Emphasizes EN54 compliance and the need for certified installers.
1.7.3. Operating conditions
Lists required environmental and installation conditions for the control panel.
1.7.4. Disclaimer
States manufacturer's responsibility regarding assembly, installation, and manual accuracy.
3. Assembly guide
3.1. Pre-installation checks
Details checks for zone and sounder lines resistance before connecting.
3.2. Installation steps
Covers the procedural steps for installing the control panel.
4. Wiring guide
4.1. Zone wiring
Explains how to wire the detection zones.
4.2. Sounder wiring
Details the wiring procedures for the sounder outputs.
4.5. Power supply wiring
Covers the procedures for connecting the power supply.
5. Start-up guide
5.1. System verification
Lists checks to perform before powering up the unit.
5.2. The system's power supply
Describes the correct order for connecting the power supply and batteries.
5.3. Testing the system
Outlines procedures for testing fault relays, sounder outputs, and battery operation.
6. User guide
6.1. Indicator lights
Explains the meaning and behavior of various indicator lights on the panel.
6.1. Indicator lights (Continued)
Continues explanation of indicator lights for system fault, supply fault, out of service, etc.
6.2. Audible indicators
Describes the different types of audible alarms and fault signals.
6.3. Control keys
Explains the function of various control keys like Zone, Test, Activate Sounders.
6.3. Control keys (Continued)
Details remaining control keys like Mute Sounders, Reset, Lock Key.
6.4. Operating modes
Details the different operating modes of the control panel.
6.5. What to do in the event of an alarm
Provides a step-by-step guide for responding to an alarm.
7. Maintenance guide
7.1. The user
Details maintenance tasks for the end-user.
7.2. The maintenance company
Outlines maintenance tasks for the dedicated company.
Need help?
Do you have a question about the CCD-040 and is the answer not in the manual?
Questions and answers