Sherwood RD-5503 Operating Instructions Manual page 39

When selecting the DOLBY PLII MUSIC
• You can adjust the various surround parameters for optimum surround effect.
Note: The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
1.
Press the CURSOR UP( )/DOWN( ) buttons to
select the "PLII MSC", then press the ENTER button.
2.
Press the CURSOR UP( )/DOWN( ) buttons to
select the desired parameter.
4.
Repeat the above steps 2 and 3 to adjust other parameters.
3.
Press the CURSOR LEFT( )/ RIGHT( ) buttons to
adjust the selected parameter as desired.
When selecting the "PANO (Panorama)" mode
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging. Select "OFF" or "ON"(default
value:OFF).
When selecting the "C. WIDTH (Center width)"
control
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees. The control can be set in 8 steps from 0 to 7
(default value : 3).
When selecting the "DIMEN (Dimension)"
control
This gradually adjusts the soundfield either towards the
front or towards the rear. The control can be set in 7 steps
from -3 to +3 (default value : 0).
39