Playing Back Tapes - Sherwood DD-5080C Operating Instructions Manual

Operations

PLAYING BACK TAPES

Press the POWER switch to turn the power on.
1
¦ U Don't turn the power off while operating the unit.
Insert the cassette with exposed tape side facing down. To close the cassette door, push the door
2
until it locks shut
EJECT
¦ U According to the type of the tape loaded, you will see the following display(Auto Tape Selector).
B C
HIGH NORM
CD SYN MPX MIN
REC
L
dB -00 -20 -10 -6
R
¦ U The type of a tape loaded is detected automatically by the auto tape selector and recording bias and
equalization are set automatically according to the characteristics of the tape such as normal, chrome or
metal tape.
If the tape is recorded with Dolby NR system, select the corresponding Dolby NR system.
3
¦ U Each time this button is pressed, the Dolby NR system changes as follows;
¦ U On commercial pre recorded cassette tapes, if Dolby NR or
the tapes are recorded with the Dolby B NR.
Normal tape : ¡ ° NOR¡ ± is displayed.
M
RELAY P
SEC
Chrome tape : "CR" is displayed.
REC
Metal tape
-3 0 +3 +6
NR B/C/OFF
DOLBY B¡ æ DOLBY C¡ æ OFF
¡ æ
8
POWER
ON/OFF
: "ME" is displayed.
appears but Dolby C is not specified,