Notes On Cassette Tape; Cleaning The Head Section; Demagnetizing The Head - Sherwood DD-5080C Operating Instructions Manual

Double cassette deck

Table of Contents

¦ U Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories

Licensing Corporation. HX Pro originated by Bang and Olufsen.

¦ U "Dolby", the double-D symbol, and "HX Pro" are trademarks of Dolby Laboratories Licensing Corporation.

NOTES ON CASSETTE TAPE

¦ U Before loading a cassette tape, take up the slack in the

tape to prevent it from becoming entangled around the

capstan.

¦ U After the recording has been finished, remove the tab

to prevent the recorded contents from being erased or

recored on accidently.

¦ U To rerecord after tabs have been removed, cover with

adhesive tape.

¦ U Do not store the tapes in direct sunlight or near equipment that generates heat. Keep the tapes away from any

magnetic fields.

¦ U Do not touch the tape surface. Store the tapes in their cases after use. Dust can cause contamination of the heads

resulting in noise.

Clean the head section about every 10 hours of use. Use a commercially available head cleaning tape.

¦ U For better recordings, you should clean the head section before every recording.

¦ U After cleaning the head section, do not load a tape until the cleared section is completely dry.

Demagnetize the recording/playback head about every 10 hours of use with a commercially avaiable demagnetizer so that

the magnetized head may not cause the sound to be deteriorated.

For side B

For side A

Table of Contents

Show Quick Links

Table of Contents