Dubbing From Deck B To Deck A - Sherwood DD-5080C Operating Instructions Manual

RECORDING A CD AUTOMATICALLY
When this unit is connected to a Sherwood DIGI LINK ¥ ²
system, the CD Synchro record function can be operated.
¦ U Before starting CD synchro recording, adjust the recording level and the balance.
Repeat steps 1,2,3 and 4 of "RECORDING"
1
Procedure.
Start CD syncro recording.
3
¦ U The CD is selected automatically on the amplifier DIGI LINK ¥ ²
¦ U If 8 seconds elapses after starting recording, the CD player starts play automatically.
NOTE
¦ U Only when the erase protection taps on the cassette tapes are in place, CD synchro record function will be
operated.
¦ U During CD synchro recording, if other program source on the receiver is selected, the unit stops CD
synchro recording and starts recording the selected program source.

DUBBING FROM DECK B to DECK A

Open the cassette door by pressing the
1
EJECT button and load a blank cassette
tape into DECK A and prerecorded
cassette tape into DECK B.
CD player controlled remotely by the DIGI LINK
CD SYN REC
B C
HIGH NORM
CD SYN MPX MIN
REC
L
dB -00 -20 -10 -6
R
13
According to the tape length edit the tracks
2
to be recorded on the CD player referring
to the operating instructions of that.
M
RELAY P
SEC
REC
-3 0 +3 +6
receiver.
Select the reverse mode
2
REVERSE
: Recording of a single side.
: Recording of both sides.