Table of Contents
Advertisement
CODE: xxxxxxxx
USE AND MAINTENANCE INSTRUCTIONS
THIS MANUAL IS THE PROPERTY OF
Model:
Serial No.:
Year of manufacture:
Conformity:
TECHNOGEL SpA
Via Boschetti n°51
24050 GRASSOBIO (BG) – Italy
Tel. (+39) 035-4522062
Fax (+39) 035-4522682
www.technogel.com
info@technogel.com
TECHNOGEL SpA
1
MIXPASTO 60/120
00
2013
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
Page 1 of 52
EN
Advertisement
Table of Contents
Related Manuals for Technogel Mixpasto 120
Summarization of Contents
General Warnings and Standards
Introduction to the Manual
Provides an overview of the manual's purpose and scope.
Manual Consultation Methods
Guidance on how to read and understand the manual's structure.
Product Warranty Terms
Details the warranty coverage and conditions for the manufactured machines.
Customer Responsibilities and Arrangements
Outlines the customer's obligations for installation and site preparation.
EC Declaration of Conformity and Identification Plate
Details about the EC conformity certification and the machine's data plate.
Assistance Request Procedures
Instructions on how to contact technical assistance for support.
Machine Description and Specifications
Provides a detailed description of the machine's components and functionality.
Operator Qualification Requirements
Specifies the necessary qualifications for machine operators and technicians.
Technical Features and Data
Machine Technical Specifications
Presents detailed dimensions, weight, and performance data for the machine models.
Manufacturer and Contact Information
Provides contact details and registered office information for TECHNOGEL SPA.
Product Characteristics and Noise Levels
Defines the characteristics of the treated product and acceptable noise levels.
Admitted Environmental Conditions
Specifies the recommended environmental conditions for machine operation.
Installation Procedures
General Safety Warnings for Installation
Essential safety precautions to be followed during machine installation.
Machine Transport and Handling
Guidelines for safely transporting and handling the machine.
Unpacking and Machine Handling
Instructions for safely unpacking and handling the machine from its packaging.
Foundation and Installation Requirements
Notes on foundation techniques and site preparation for machine installation.
Detailed Installation Guidelines
Specific steps for placing, setting up, and connecting the machine.
Demolition and Disposal Guidelines
Procedures and considerations for dismantling and disposing of the machine.
Functioning and Use
Machine Functioning Overview
Explanation of the machine's operational functions, controls, and phases.
Operating Phases and Control Usage
Details on the different operating phases and how to use the machine controls.
User Interface and Command Operations
Explains interaction with the control panel and navigation of menus.
Customizable Cycle Programming
Guide to setting up and programming custom operational cycles.
Product Discharge and Cycle Stop Actions
Instructions for product discharge and stopping the machine's cycle.
Intended and Non-Intended Uses
Defines the proper uses of the machine and prohibits improper applications.
Work Areas, Dangerous Areas, and Safety
Defines work zones, hazards, and necessary safety protocols.
Dangers and Residual Risks Assessment
Identifies potential dangers and residual risks associated with machine operation.
Personal Protective Equipment (PPE) Requirements
Specifies the required personal protective equipment for operators.
Signal Plates and Warnings on Machine
Lists and explains the safety and warning plates found on the machine.
User Instructions
Control Devices and Operator Responsibilities
Details control devices and the tasks assigned to authorized operators.
Machine Functioning and Stopping Procedures
Explains how to operate and stop the machine, including voluntary and emergency stops.
Safety Device Checks and Verification
Instructions for checking the proper functioning of all safety devices.
Start-Up and Commissioning Guidelines
Steps for the initial start-up and commissioning of the machine.
Routine Maintenance
General Maintenance Safety Precautions
Safety rules to be followed by maintenance technicians.
Machine Washing and Sanitising Procedures
Detailed steps for cleaning and sanitizing the machine parts.
Cleaning Advice and Gasket Replacement
Tips for effective cleaning and procedures for replacing O-ring gaskets.
Cooling System Draining
Instructions for draining the cooling system to prevent winter damage.
Glycol Level Check and Fuse Replacement
Procedures for checking glycol levels, safety valves, and replacing fuses.
Periodic Maintenance Schedule
A summary table outlining the frequency of maintenance operations.
Diagnosis and Troubleshooting
Troubleshooting Common Problems
Identifies common issues, their causes, and solutions for the machine.
Attached Documentation
List of Attached Documents
Lists supplementary documents included with the manual.
Need help?
Do you have a question about the Mixpasto 120 and is the answer not in the manual?
Questions and answers