Table of Contents
Advertisement
Planning and installation
EcoTouch DS 5050T
2-power levels (0 % - 50 % - 100 %)
WATERKOTTE GmbH, Gewerkenstraße 15, D-44628 Herne
Tel.: 0049/(0)2323/9376-0, Service: 0049/(0)2323/9376-350
Fax: 0049/(0)2323/9376-99, E-Mail: info@waterkotte.de
Internet: http://www.waterkotte.de
Z18494 / 20092012
04.12..2015 / Z21974
Advertisement
Table of Contents
Related Manuals for WATERKOTTE EcoTouch DS 5056.5T
Summarization of Contents
Safety
Intended use
Defines the specific applications and purpose of the heat pump.
Basic safety precautions
Outlines critical guidelines for safe operation and handling.
Hazards
Environmental protection
Details regulations and practices for environmental care during operation and disposal.
Modifications and repairs on the heat pump
Specifies restrictions and procedures for unauthorized modifications and repairs.
Product description
Overview
Presents a general view of the heat pump's external features and main components.
Components and installation
Heating system EcoTouch DS 5050T
Describes the construction and features of the main heating system unit.
Installation
Outlines the procedures and requirements for installing the heat pump system.
Electrical equipment
Electronic heat pump control
Explains the function and operation of the electronic control panel.
Transport
Transport to installation site
Details safe handling and movement of the heat pump to its final location.
Installation
Environmental conditions for installation
Specifies the required room conditions and clearances for optimal installation.
Installation and connection
Connection to heating system
Explains how to connect the heat pump to the building's heating network.
Connection to heat source
Water glycol systems
Details the connection and requirements for water glycol heat source systems.
Groundwater heat source
Outlines the connection and safety considerations for groundwater heat sources.
Electrical work
Electrical installation
Guides on performing the electrical setup, following diagrams and regulations.
Installation instructions for external sensor
Cabeling
Describes how electrical cables are routed and secured within the unit.
Commissioning
Pre-startup checks
Lists essential checks to perform before the initial start-up of the heat pump.
Turning heat pump off
Taking heat pump out of operation for extended period
Outlines procedures for long-term deactivation of the heat pump.
Troubleshooting
Possible faults and solutions
Provides a guide to diagnosing and resolving operational problems.
Safety measures
Pressure limits of compressor
Explains the safety features related to compressor pressure limits and protection.
Motor protection against excessive temperature
Describes the system for protecting the motor from overheating.
Connection diagrams
Heat pump EcoTouch DS5050T with underfloor heating system, without single room control
Shows the schematic for connecting the heat pump to an underfloor heating system without room control.
Need help?
Do you have a question about the EcoTouch DS 5056.5T and is the answer not in the manual?
Questions and answers