Related Manuals for Creo Trendsetter 800
Summarization of Contents
Operational Lights and What They Mean
Operator Interface Lights
Details the meaning of imaging, load, and error lights on the operator interface for status monitoring.
Imaging Plates Using Different Workflows
Prinergy Workflow
Describes the process of submitting files to the Trendsetter device using the Prinergy workflow.
Brisque Workflow
Details how to submit files to the Trendsetter device using the Brisque workflow.
TIFF Workflow
Explains the procedure for submitting files to the Trendsetter device via a TIFF workflow.
Imaging a Plate
Prepare for Plate Imaging
Steps to ensure device readiness, submit the file, and confirm correct plate availability.
Load and Align Plate
Instructions for removing slip sheet, positioning, aligning, and lowering the plate for imaging.
Start and Unload Plate
Process of initiating plate imaging and safely unloading the completed plate.
Operator Maintenance and Operations
Basic Operations
Covers essential device operations like turning on, turning off, and resetting the output device.
Scheduled Maintenance
Outlines routine maintenance tasks for optimal device performance, including cleaning and filter replacement.
Replacing the Air Supply Filters
Replacing the 5 Micron Filter
Step-by-step guide for safely disconnecting and replacing the 5-micron air filter assembly.
Replacing the 0.01 Micron Filter
Step-by-step guide for safely disconnecting and replacing the 0.01-micron air filter assembly.
Cleaning Inside the Output Device
Cleaning the Edge Detection Strip
Instructions for cleaning the edge detection strip using isopropanol.
Cleaning the Plate Roller
Procedure for cleaning the blue plate roller with a lint-free cloth and water.
Replacing the Air Intake Filter
Air Intake Filter Replacement
Detailed instructions for removing the access panel, replacing the air intake filter, and reattaching the panel.
Removing a Flyoff
Initial Flyoff Detection
Describes the device's automatic suspension of activity upon detecting a media flyoff.
Plate and Clamp Handling
Procedures for accessing, freeing, and cleaning media from the drum clamps after a flyoff.
Clearing Error and Resuming
Steps to reposition clamps, verify polarity, close panels, and resume the job after a flyoff.
Need help?
Do you have a question about the Trendsetter 800 and is the answer not in the manual?
Questions and answers