Related Manuals for Korg Concert NC-300 Series
Summarization of Contents
IMPORTANT SAFETY INSTRUCTIONS
FCC Regulation Warning
Warning regarding FCC regulations for Class B digital devices and potential radio interference.
CE Mark Standards
Explanation of CE mark conformity for European Harmonized Standards, including EMC and Low Voltage Directives.
Features
High-Quality Sounds
Details the expressive sounds, including stereo concert grand pianos and layered mode.
Digital Effects
Explains reverb and chorus effects with adjustable levels for ambiance and depth.
Three Pedals
Describes the damper, sostenuto, and soft pedals with half-pedaling support for nuanced control.
Metronome Functionality
Covers adjustable tempo, volume, and meter for the metronome.
Keyboard Touch Sensitivity
Explains keyboard sensitivity selection via three different response curves.
Pitch Adjustment Features
Details keyboard transposition and fine-tuning capabilities for pitch modification.
Temperaments and Tuning
Discusses equal, Werckmeister, and Kirnberger temperaments with stretch tuning.
Input and Output Jacks
Describes connecting audio devices via the input jack and outputting sound.
Built-in Recorder
Introduces the recorder for capturing and replaying musical performances.
MIDI Capabilities
Explains the MIDI interface for communication and control between devices.
USB Connectivity
Details connecting the piano to a computer via USB for data exchange and control.
Controls and Connectors
Top Panel Controls
Identifies and explains the main controls located on the top panel of the piano.
DEMO Button Operation
Explains how to select and play the eight built-in sound demos.
Sound Selection Buttons
Describes selecting sounds using the buttons and the bank function.
Bank Button Functionality
Details how to select different sound banks for sound selection.
Metronome Button
Explains how to turn the metronome feature on or off.
Tempo Adjustment Knob
Describes adjusting the tempo for the metronome and recorder.
Recorder Section
Details the controls for recording and replaying musical performances.
Music Stand and Speakers
Mentions the music stand for sheet music and the piano's speakers.
Lower Panel Controls and Ports
Identifies and explains the various ports and connectors on the lower panel.
Getting Ready to Play
Initial Setup Procedures
Covers connecting power, raising the keyboard cover, and turning the piano on/off.
Adjusting Volume Output
Explains how to adjust the output volume using the volume knob.
Using Headphones
Details how to connect and use headphones for silent practice.
Setting Up the Music Stand
Instructions for setting up and using the music stand.
Input Jack Usage (NC-500)
Describes playing audio devices through the piano speakers.
Output Jack Usage
Explains how to connect the piano sound to external systems.
Attaching Speaker Covers
Instructions for reattaching speaker covers to the unit.
Listening to the Demos
Sound Demo Overview
Details how to listen to the eight built-in sound demos.
Sequential Sound Demo Playback
Explains playing all sound demos sequentially.
Selecting Specific Sound Demos
Guides on choosing and playing individual sound demos.
Pausing Demo Playback
Instructions for pausing and resuming demo playback.
Stopping Demo Playback
Explains how to stop and restart demo playback using START/STOP.
Listening to Piano Songs
Piano Song List
Lists the 32 piano songs with their titles and composers.
Sequential Piano Song Playback
Details playing all piano songs sequentially.
Selecting Specific Piano Songs
Guides on choosing and playing individual piano songs by key press.
Pausing Song Playback
Instructions for pausing and resuming song playback.
Stopping and Restarting Songs
Explains stopping and restarting song playback using START/STOP.
Practicing with Piano Songs
Guides on practicing with piano songs, including hand parts.
Practicing Individual Hand Parts
Details how to practice left or right hand parts of songs.
Playing the Instrument
Selecting Sounds in Single Mode
Explains how to choose individual sounds in single mode.
Combining Sounds in Layered Mode
Details how to layer two sounds for simultaneous playback.
Adjusting Layered Sound Volume Balance
Explains adjusting volume balance between sounds in layered mode.
Returning to Single Mode
Guides on switching back from layered to single mode.
Using Reverb and Chorus Effects
Details how to use and adjust reverb and chorus effects.
Using the Pedals
Damper Pedal Function
Explains the function and use of the damper pedal for sustain.
Sostenuto Pedal Function
Explains the function and use of the sostenuto pedal for selective sustain.
Soft Pedal Function
Explains the function and use of the soft pedal for tonal softening.
Damper Pedal in Layered Mode
Describes assigning the damper pedal to sounds in layered mode.
Using the Metronome
Metronome On/Off Control
Instructions for activating and deactivating the metronome feature.
Adjusting Metronome Volume
Explains how to change the metronome's volume level.
Tempo Adjustment with Knob
Details using the tempo knob to adjust the metronome speed.
Tempo Setting by Numerical Input
Guides on setting tempo numerically via keyboard key presses.
Setting the Meter and Accent
Describes setting the metronome's beat accent for different meters.
Changing Metronome Accent Sound
Explains changing the metronome accent sound from standard to bell.
Selecting a Temperament
Stretch Tuning Note
Explains the concept of stretch tuning for a natural acoustic piano sound.
Recording and Replaying Your Performances
Recording Performances
Provides step-by-step instructions on how to record musical performances.
Starting and Ending Recordings
Details methods to initiate recording and how to stop and save data.
Pausing and Resuming Recording
Instructions for pausing and resuming recording sessions.
Replaying Recorded Performances
Playing Back Recordings
Guides on how to play back recorded musical performances.
Adjusting Volume for Two-Part Playback
Explains adjusting volume balance between two parts during playback.
Looping Playback
Details setting playback to repeat continuously.
Editing and Erasing Recordings
Editing Existing Recordings
Instructions for re-recording over or adding to existing recordings.
Erasing Recorded Parts
Guides on how to delete a specific recorded part.
Checking Recorded Data Amount
Explains how to check the remaining memory for recordings.
MIDI Functions
Understanding MIDI
Defines MIDI (Musical Instrument Digital Interface) and its purpose.
MIDI Usage Scenarios
Explains how the piano's MIDI capability can be utilized for music creation.
MIDI Connections
Details how to connect MIDI devices using MIDI IN/OUT jacks and cables.
Default MIDI Settings
Lists the default MIDI parameters that are automatically restored.
Changing MIDI Channel Settings
Guides on how to change the MIDI channel assignment for communication.
Using the Piano as a Tone Generator
Multitimbral Tone Generator Mode
Explains using the piano as a 16-part multitimbral tone generator.
Local On/Off Setting
Details the setting to control sound output from the piano or external device.
MIDI Program Change
Program Change Overview
Explains MIDI program change messages for switching sounds on devices.
Sending Program Changes
Describes how the piano sends program change messages to remote devices.
Receiving Program Changes
Explains how the piano responds to received program change messages.
Enabling/Disabling Program Changes
Guides on disabling the program change feature to prevent transmission/reception.
MIDI Control Change
Control Change Overview
Explains MIDI control change messages for remote control of features.
Enabling/Disabling Control Changes
Guides on disabling control change messages to prevent transmission/reception.
MIDI Data Dumps (NC-500)
Saving Performance Data
Instructions for saving recorded performances via MIDI data dump.
Reloading Saved Data
Instructions for loading saved performances back into the piano.
Connecting to a Computer via USB (NC-500)
Understanding USB
Defines USB (Universal Serial Bus) and its role in computer connectivity.
Making the USB Connection
Details how to physically connect the piano to a computer via USB cable.
USB MIDI Interface Driver Ports
Explains the function of different driver ports for USB MIDI communication.
MIDI Connector Operation
Describes how MIDI connectors function with or without a USB connection.
Installing and Setting the Korg USB MIDI Driver
Windows XP Driver Installation
Specific instructions for installing the driver on Windows XP.
Navigating Windows Properties
Accessing Windows XP properties to manage audio and driver settings.
Hardware Update Wizard Steps
Steps involved in the hardware update process for driver installation.
Selecting Driver Source
Selecting the driver source, typically from a CD-ROM or disk.
Handling Unsigned Drivers
Warning about unsigned drivers and proceeding with installation.
Uninstalling the Korg USB MIDI Driver
Accessing Device Properties for Uninstall
Accessing device properties through Windows settings for uninstallation.
Initiating Driver Uninstall
Navigating to the driver tab and clicking the uninstall button.
Confirming Device Removal
Confirmation prompt displayed before uninstalling the device.
Disabling Digital Signature Requirement
System Properties Configuration
Accessing system properties to manage driver signing settings.
Driver Signing Options
Selecting options for handling unsigned drivers during installation.
Using with Mac OS X
Mac OS X Connection Setup
Instructions for connecting and using the piano with Mac OS X.
Audio MIDI Setup Utility
Using the Mac's Audio MIDI Setup utility for MIDI device configuration.
Mac OS X MIDI Driver Port Configuration
Explains port configuration within Mac OS X's default MIDI driver.
Application Input Settings (Mac)
Setting application input ports for MIDI data from the piano.
Troubleshooting
Piano Not Turning On
Checks for power connection and switch issues when the piano is unresponsive.
No Sound Output
Troubleshooting steps for when no sound is produced by the piano.
Notes Dropping Out
Addresses issues with notes dropping out due to polyphony limits.
Unusual Sound Characteristics
Explains potential sound variations as normal characteristics.
Recording Issues (NC-500)
Checks for issues preventing the recording function.
External MIDI Device Not Responding
Troubleshooting MIDI communication problems between devices.
USB-MIDI Driver Installation Problems
Steps for resolving driver installation issues on Windows XP.
Software Unresponsiveness
Troubleshooting steps when connected software is unresponsive.
Understanding Maximum Polyphony
Explains the piano's polyphony limit and its impact on sound.
Assembling the NC-500 Piano Stand
Assembly Warning
Safety warning regarding assembly requiring at least two people.
Assembly Precautions
Important precautions for safe and correct stand assembly.
Required Tools
Lists the necessary tools for stand assembly.
Assembly Procedure
Step-by-step instructions for assembling the piano stand.
Checking Finished Assembly
Checks for leftover parts and proper screw tightness after assembly.
Maintenance, Transport, and Disassembly
Guidelines for maintaining, moving, and disassembling the stand.
Pedal Unit Floor Mark Note
Warning about potential floor marks from prolonged pedal unit placement.
Assembling the NC-300 Piano Stand
Assembly Warning
Safety warning regarding assembly requiring at least two people.
Assembly Precautions
Important precautions for safe and correct stand assembly.
Required Tools
Lists the necessary tools for stand assembly.
Assembly Procedure
Step-by-step instructions for assembling the piano stand.
Checking Finished Assembly
Checks for leftover parts and proper screw tightness after assembly.
Maintenance, Transport, and Disassembly
Guidelines for maintaining, moving, and disassembling the stand.
Pedal Unit Floor Mark Note
Warning about potential floor marks from prolonged pedal unit placement.
Operation of Piano Switches and Keys
SOUND Switch Operations
Explains the function of various sound buttons when combined with other controls.
Recorder Section Operations (NC-500)
Details actions resulting from holding TRANSPOSE/FUNCTION with recorder buttons.
Keyboard Control Operations
Explains settings based on holding specific buttons with keyboard keys.
Need help?
Do you have a question about the Concert NC-300 Series and is the answer not in the manual?
Questions and answers