Page 2
You are cautioned that any changes or modifications not In the event of a malfunction or when maintenance is expressly approved in this manual could void your necessary, consult an authorized Sony dealer. authority to operate this equipment. Warning on power connection Use a proper power cord for your local power supply.
Page 3
All interface cables used to connect peripherals must be Important Safety Instructions shielded in order to comply with the limits for a digital • Read these instructions. device pursuant to Subpart B of Part 15 of FCC Rules. • Keep these instructions. •...
Page 4
Fachpersonal. Dans le cas d'une défaillance ou de nécessité d'entretien, Sollten am Gerät Probleme auftreten oder eine Wartung consulter un revendeur Sony autorisé. erforderlich werden, wenden Sie sich an einen Cet appareil contient des substances susceptibles de autorisierten Sony -Händler.
Page 5
Nel caso di malfunzionamenti o di necessarie riparazioni dell'apparecchio, consultare un rivenditore En caso de mal funcionamiento o cuando sea necesario autorizzato Sony. el servicio de mantenimiento, consulte a su proveedor Questo apparecchio contiene sostanze che possono Sony.
Page 6
Pour les clients européens Para los usuarios en Europa Ce produit portant la marque CE est conforme à la fois Este producto con la marca CE cumple con las à la Directive sur la compatibilité électromagnétique Directivas EMC (89/336/CEE) y de Baja Tensión (73/ (EMC) (89/336/CEE) et à...
Table of Contents Precaution .............. 9 On Safety ............9 On Installation ............ 9 Handling the LCD Screen ........9 About the Fluorescent Tube ....... 9 On Cleaning ............9 On Repacking ............. 9 On Mounting on a Rack ........10 On Fan Error ............
• Should any solid object or liquid fall into the cabinet, becomes dark, unstable or does not turn on, consult your unplug the unit and have it checked by qualified Sony dealer. personnel before operating it any further. • Do not drop or place heavy objects on the power cord.
The fan for cooling the unit is built in. When the “FAN ERROR” message is displayed, turn off the power and Rack mount monitors contact an authorized Sony dealer. The LMD-1410/1420 can be installed in a standard 19- inch rack using an optional rack mounting bracket MB-...
Page 11
External sync input (LMD-1420/2020) When the EXT SYNC button is in the on position, the unit can be operated on the sync signal supplied from an external sync generator. Automatic termination (connector with mark only) The input connector is terminated internally at 75 ohms when nothing has been connected to the output connector.
Location and Function of Parts and Controls Front Panel LMD-1420/2020 MENU VOLUME POWER RGB/ BLUE LINE A LINE B COMPONENT SYNC ONLY SCAN ASPECT INHIBIT RESET ENTER qs qa 0 9 8 7 6 4 3 2 MENU VOLUME POWER RGB/ BLUE LINE A...
Page 13
a Tally lamp (LMD-1420/2020) j SDI button You can check the status of the monitor by the color of Press to monitor the signal from the OPTION IN the tally lamp. connector. The tally lamp lights in red, green or amber according to k RGB/COMPONENT button the input signals.
OPTION IN connector (D-sub 9-pin, female) IN connector (LMD-1420/2020) When this unit operates on an external sync signal, When optional Sony input adaptor BKM-320D is connect the reference signal from a sync generator connected, SDI signals are input. to this connector.
Page 16
d RGB/COMPONENT connectors Y/C IN/OUT (4-pin mini-DIN) Analog RGB signal or component (Y, P ) signal These are the input/output connectors for a Y/C input connectors and their loop-through output separate signal. Connect them to the Y/C separate connectors. input/output connectors on equipment such as a Press the RGB/COMPONENT button on the front panel VCR, video camera, or another monitor.
LMD-2010/2020 Installing to the Rack Remove the screws (4) to remove the stand. OPTION LINE A PARALLEL REMOTE RGB/COMPONENT AUDIO IN OPTION IN LINE B VIDEO VIDEO SYNC AC IN AUDIO AUDIO AUDIO LIN E LIN E RGB / PON ENT SD I EX T SY NC...
Connecting the AC Attaching the Input Power Cord Adaptor Connect the supplied AC power cord as illustrated. LMD-1420/2020 Before attaching the input adaptor, disconnect the power Plug the AC power cord into the AC IN socket on cord. the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord.
Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area MENU VOLUME POWER RGB/ BLUE...
4 If ASIA EXCEPT JAPAN is selected: Selecting the Menu Customers who will use this unit in the shaded areas shown in the map below should select NTSC Language AREA. Other customers should select PAL AREA. You can select one of seven languages (English, French, German, Spanish, Italian, Japanese, Chinese) for displaying the menu and other on-screen displays.
Press the M or m button to select the following menu, then press the , or ENTER button. Using the Menu LMD-1410/2010: USER CONFIG (User Configuration) menu The unit is equipped with an on-screen menu for making LMD-1420/2020: USER CONFIG 1/2 (User various adjustments and settings such as picture control, Configuration 1/2) menu input setting, set setting change, etc.
REMOTE PARALLEL COLOR TEMP/BAL menu The COLOR TEMP/BAL menu is used for adjusting the 1 PIN picture white balance. 2 PIN You need to use the measurement instrument to adjust 3 PIN the white balance. 4 PIN Recommended: Konicaminolta color analyzer CA-210 6 PIN 7 PIN C O L O R T E M P / B A L...
Submenu Setting Submenu Setting RGB/COMP SEL When a signal input via the RGB/ CONTROL You can adjust the picture. COMPONENT connector is being • CONTRAST: Adjusts the picture monitored, based on the signal being contrast. input, select RGB or COMP. •...
• – – – (“– – –”: No function is assigned.) Submenu Setting • LINE A SCAN Sets the scan size of the picture. Select • LINE B from “OFF” and “ZOOM” mode. • RGB/COMP PIC DELAY MIN Selects to set the delay by the picture •...
Troubleshooting Specifications This section may help you isolate the cause of a problem Picture performance and as a result, eliminate the need to contact technical support. LCD panel a-Si TFT Active Matrix • The display is colored in green or purple t Select Picture size LMD-1410/1420: 14 type the correct input by pressing RGB/COMPONENT...
Page 27
OPTION AUDIO input jacks (LMD-1420/2020) Peak inrush current RCA pin (2), –5 dBu 47 kilohms or (1) Power ON, current probe method: higher 90 A (LMD-1410/1420), External synchronized input (LMD-1420/2020) 64 A (LMD-2010/2020) BNC type (1), 0.3 to 4 Vp-p (2) Hot switching inrush current, negative polarity binary measured in accordance with...
Pin assignment Pin number Functions PARALLEL REMOTE terminal Designating LINE A input signal Modular connector (8-pin) Designating LINE B input signal Designate RGB/COMPONENT input signal 16:9 Selecting under Selecting normal You can allocate functions using the REMOTE PARALLEL menu (see page 25). Wiring required to use the Remote Control Connect the function you want to use with a Remote Control to the Ground (Pin 5).
Side Dimensions 86.8 (3 76.2 LMD-1410/1420 Front 343 (13 96.8 (3 264.4 (10 Bottom MENU VOLUME POWER RGB/ BLUE LINE A LINE B COMPONENT SYNC ONLY SCAN ASPECT INHIBIT RESET ENTER 204.3 (8 4-M5 Rear 100 (4) 165.1 (6 216.3 (8 Unit: mm (inches) LINE A PARALLEL REMOTE...
LMD-2010/2020 Side Front 87 (3 80.6 470 (18 MENU VOLUME POWER 96.8 RGB/ BLUE LINE A LINE B COMPONENT SYNC ONLY SCAN ASPECT INHIBIT RESET ENTER 264.4 (10 Bottom Rear 204.3 (8 4-M5 100 (4) 165.1 (6 216.3 (8 LINE A PARALLEL REMOTE RGB/COMPONENT OPTION...