Related Manuals for Hydrotec HY-MAG DN25
Summarization of Contents
General Information and Operation
General Overview
Introduction to the HY-MAG Integral control box and its function.
Technical Data
Specific technical data including voltage, protection class, and operating parameters.
Connection of Water Part
HY-MAG DN25 – DN65 Connection
Instructions for connecting the control box to water parts DN25-DN65.
HY-MAG DN100 Connection
Connection details for the HY-MAG DN100, including thermal protection.
Initiation and Normal Operation
Initiation Phase
Describes the initial displays and system checks during the initiation phase.
Normal Operation Display
Explains LED patterns and display monitoring during continuous operation.
Menu and Operation Modes
Menu Sequences and Programming
How to input and program the control box using front foil buttons.
Mode of Operation Selection
How to select between continuous operation and timer control modes.
Settings and Configuration
Operating Hours Tracking
Details the absolute and relative counters for tracking unit operating hours.
Date and Time Adjustment
How to retrieve and alter the internal timer and date settings.
Time Zone Programming
How to program switch-on/off times for groups or individual days.
Service and Failures
Language Selection
How to select and confirm the menu language (German/English).
Service Menu Access
Information on accessing the code-protected service menu.
Failure Indication Methods
How the control box indicates failures via LEDs and display.
Failure Types and Remedial Actions
Specific Failure Types
Details on failures like Undercurrent, Overload, Short cut, Control box, and Overheating.
General Failure Checks
Initial checks for display issues, power, and fuse replacement.
Remedial Actions for Faults
Step-by-step instructions for addressing specific fault types.
Need help?
Do you have a question about the HY-MAG DN25 and is the answer not in the manual?
Questions and answers