Advertisement
Troubleshooting
Solution 3
Some power outlets will not fit all four protrusions of the collar. In order to improve the fit
of the cigarette lighter adapter in the power outlet of the car, the collar can be cut to size.
In order to do so, please cut as many protrusions as necessary with scissors. Cut one by one,
always trying the fit in the power outlet after each cut. Cut the protrusions from one side to
the other, not the opposites.
���
���
���
Issue:
The TuneBase FM connects firmly to the power outlet of my car but the TuneBase FM
still rotates.
Solution
Check to see if the power outlet of your car rotates in its socket. If so, please consult your
car manufacturer.
Test fit in power outlet after each cut!
Issue:
The rubber friction washer is out of position and I cannot insert the cigarette lighter
adapter into the car's power outlet.
Solution:
Please use a clean and empty table for disassembly. DO NOT ATTEMPT TO DO THIS IN THE
CAR. Please use pliers to loosen the nut at the end of the cigarette lighter adapter slightly. It is
not necessary to unscrew the entire nut. Move the friction washer back into centered position.
Use pliers to tighten the nut firmly.
Troubleshooting | 09
Advertisement
