Related Manuals for DEVA DB9000-RX
Summary of Contents for DEVA DB9000-RX
- Page 1 SET-UP INSTRUCTIONS How can the DB9000-TX be set to act as a Streaming Audio Server, sending audio to DB9000-RX decoder/s used as an IP Audio Client Publish Date: 24-Feb-2017...
-
Page 2: Table Of Contents
Point-to-point audio transmission ....................4 Point to multi-point audio transmission ..................5 DB9000-TX and DB9000-RX Set-up ....................5 DB9000-TX Streaming Audio Server Set-up ................... 6 DB9000-RX IP Audio client Set-up ....................7 Appendix A ............................8 Appendix B ............................12... - Page 3 THIS PAGE IS INTENTIONALLY LEFT BLANK...
-
Page 4: General Information
IP Address. In case you are not aware of the IP Addresses and how to open the WEB interface, please refer to “Appendix A - DB9000-TX Quick User Guide” on page 7 “Appendix B - DB9000-RX Quick User Guide” on page... -
Page 5: Point To Multi-Point Audio Transmission
If the device is placed behind a router, you will have to make sure that the Stream Server Port is properly NAT forwarded; • DB9000-RX may have a dynamic IP address; • DB9000-RX should have access to DB9000-TX over the network (Internet or LAN). - 5 -... -
Page 6: Db9000-Tx Streaming Audio Server Set-Up
5. Preferably change the Name of the stream to identify you server easily; 6. Press [Save] to save the applied changes. For detailed information and instructions on how communication with the DB9000-TX can be established, please refer to “Appendix A - DB9000-TX Quick User Guide” on page... -
Page 7: Db9000-Rx Ip Audio Client Set-Up
DB9000-RX IP AUDIO CLIENT SET-UP 1. Go to Configuration> IP Audio; 2. In IP Audio Client section – URL of the DB9000-TX Server should be specified. The URL is a mandatory requisite needed in order for a connection with the server to be established. - Page 8 Professional IP Audio Encoder BEFORE YOU USE THIS PRODUCT In order to be able to enjoy all the benefits of owning your new DEVA product, please verify first that the latest software and firmware release were installed. Visit www.devabroadcast.com/downloads for the most recent software and firmware downloads, prior the installation.
- Page 9 STEP 2 Configuration DB9000-TX is controlled trough a build in WEB Server and a standard web browser can be used to monitor its status or to make some adjustments. To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it through the headphones when you turn on the the device.
- Page 10 - IP Address, Netmask, Gateway, Primary and Secondary DNS. Otherwise, enable the DHCP. Web erver ettings In order to enhance the security of DB9000-TX you can set new Username and Password. In case a dialog box appear, fill in the NEW username and password requested.
- Page 11 DB9000-TX acts as Ethernet to an RS-232 redirector. You can connect any RS-232 compatible equipment to DB9000-TX and to communicate with it over the Internet. A special software (Virtual C ort to Ethernet Tool) need to be installed on your PC in order for the COM Port configuration to take place.
- Page 12 Professional IP Audio Decoder BEFORE YOU USE THIS PRODUCT In order to be able to enjoy all the benefits of owning your new DEVA product, please verify first that the latest software and firmware release were installed. Visit www.devabroadcast.com/downloads for the most recent software and firmware downloads, prior the installation.
- Page 13 65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com This Quick user guide will make the installation of DB 9000-RX quick and easy . Applying these principles, yo ca simplify the process and save yourself extra time and effort .
- Page 14 65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Network Configuration STEP 5 General Network ettings If you prefer to use static settings please disable the DHCP and fill in the information requested - IP Address, Netmask, Gateway, Primary and Secondary DNS.
- Page 15 65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Backup Audio Configuration STEP 7 Audio Loss and Audio Recover Select the appropriate levels of loss and recovery of the audio signal. Do not forget to set the timeout. Set wether the loss of audio should be registered by the one channel only or for both of them.
- Page 16 65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Stereo Encoder STEP 10 DB9000 RX has a built-in RDS Encoder, it allows you to brand your station. Program Station (PS) Name Settings omprise of PS Static, PS Dynamic DPS Scroll Step, DPS Scroll Speed.
- Page 17 65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Factory Defaults, Reboot, Firmware update STEP 12 The Factory Defaults page To restore DB9 0-RX to its Factory Defaults you should first press the Restore button.
Need help?
Do you have a question about the DB9000-RX and is the answer not in the manual?
Questions and answers