Ground Loops ..........................21 Selection of Operating Modes ......................22 Sidechain Mode ..........................22 Loop-Through Mode ........................22 Connecting The SmartGen 6.0 ......................23 Important Connection Considerations! ..................23 Sidechain Mode (Recommended) ....................24 Loop-Through Mode ........................25 Activating the TA Flag ........................26 Data Interconnection ........................
Page 3
Navigation Through LCD Menu ....................31 The Basics ............................. 31 Menu Structure ..........................31 LCD Menu Explained ........................51 Main Screen with Mandatory RDS Readings ................51 RadioText Preview ........................51 DI .............................. 51 Date & Time ..........................51 Decoding Standard, RDS Output, Pilot Lock, Operatimg Mode, Temperature ....... 51 RDS Level, Pilot Level, Phase, BER ..................
Page 4
Terminal Configuration ........................75 Serial COM Port Configuration ....................76 Power-Up ............................. 78 Echo .............................. 79 ASCII Programming Syntax ......................80 How to Type ..........................80 Correcting Mistakes ........................80 Validity Symbols ........................... 80 Encoder Housekeeping Commands ....................81 Register Interrogation ........................81 Encoder Initialization ........................
Page 5
APPENDIX A ........................... 89 RDS: Europe vs America ......................89 The RDS System ........................... 89 APPENDIX A.1 ..........................90 Addressing The SmartGen 6.0 ....................... 90 APPENDIX B.1 ..........................91 RDS Applications Supported ......................91 AF ............................91 CT ............................91 DI .............................
For us there is no stage when we deem that we have reached the most satisfactory level in our work. Our engineers are in constant pursuit of new ideas and technologies to be captured in DEVA solutions. Simultaneously, a strict control is being exercised at each step of any new development.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Typographic conventions This manual uses the following typographic conventions: Style Used for NOTE Important notes and recommendations Example Used when example text is cited “Menu”...
SNMPv2C. The function SNMP traps or E-mail notification on user-defined alerts is also available. SmartGen 6.0 is supplied with two separate outputs – one for RDS+MPX and one for RDS only. The two General Purpose Inputs are with user-defined functionality, allowing easy integration of SmartGen 6.0 to the station’s needs.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com FRONT PANEL ADIO UBCARRIER NCODER PILOT FREE ODEL MART LOCK DATA QUALITY 1. USB Connector - B-Type, for interconnection with PC / USB 2.0 Communication Port 2.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com REAR PANEL COMMUNICATION PORTS COM 1A COM 2A MADE IN BULGARIA CAUTION: TO PREVENT ELECTRICAL SHOCK, 100-240 VAC 50-63Hz, 25VA w w w.devabroadcast.com DISCONNECT POWER BEFORE SERVICING RDS SIGNALS GPIO...
• The servicing of electronic equipment should be performed only by qualified personnel only; • Before removing the covers, SmartGen 6.0 must be switched off and the power cable unplugged; • Never touch the wires or the electrical circuits; •...
Use the device only with its top cover on to avoid electromagnetic anomalies. Otherwise, this may cause problems with the normal functionality of the unit; • For the normal remote operation of the unit, connect SmartGen 6.0 to a good quality Internet connection; •...
Mounting RACK REQUIREMENT The SmartGen 6.0 mounts in a standard 19-inch equipment rack and requires only 1¾ inches (1U) of vertical rack space. In order the painted finish around the mounting holes to be protected, the use of plastic washers is recommended.
The Fuse holder can be found right under the Mains connector. Before connecting the AC Power, make sure that the mains supply at your location is in accordance with SmartGen 6.0’s Power Supply Factory Settings - 100÷240 VAC, 1 Amp Fuse. CAUTION: Permanent damage will result if improper AC supply voltage is applied to SmartGen 6.0 device.
When sidechain operation mode is chosen the RDS OR MPX OUTPUT contains only the RDS sub carrier, the composite MPX signal is not routed through SmartGen 6.0. This operating mode preserves the multiplex signal integrity and assures uninterrupted program transmission, in case of encoder failure event.
Also, it is important that the operating software be installed on the PC before the SmartGen 6.0 is connected to the encoder for programming the ‘static’ message registers and operating defaults.
(composite/ MPX) input of the FM exciter; 3. Using a suitable cable, connect the other side of the ‘T’ adapter to the PILOT OR MPX INPUT of SmartGen 6.0; 4. Cable the RDS OR MPX OUTPUT of the encoder to the second wideband (subcarrier) input of the FM exciter.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com LOOP-THROUGH MODE 1. Connect the output of the stereo generator directly to the PILOT OR MPX INPUT of SmartGen 6.0; 2. Connect the RDS OR MPX OUTPUT of the encoder to the composite/MPX wideband input of the FM exciter.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com ACTIVATING THE TA FLAG The Travel Announcement feature is a temporary command. This flag must coincide with the actual voice warning of a traffic condition. The encoder includes a means to access this flag with a manual switch closure, which will doubtlessly prove as much faster, convenient and reliable than software control of the TA function.
RDS Data-Entry Software routines have been supplied on a CD-ROM. This software also may be downloaded from the DEVA Broadcast Ltd. Website. Alternatively, the encoder may be addressed with any computer running a ‘terminal emulation’ program, or with a simple “dumb”...
‘transparent,’ as if the encoder was connected directly to the controlling system. The figure below indicates the proper pin connections for the cable used to connect the SmartGen 6.0 to a conventional external modem. The three conductors shown are the only ones required.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Subcarrier Injection Level When sidechain operation mode is chosen, the RDS subcarrier is the only signal that appears at the rear-panel ‘RDS & MPX OUTPUT’ or ‘RDS OUT’ connector. As some exciters require a higher signal level at auxiliary wideband (SCA) inputs, the RDS signal has been made adjustable to any value between zero and 4 volts, peak-to-peak.
MPX signal. For this reason we recommend using the composite/MPX signal for synchronization. In the sidechain mode, the SmartGen 6.0 simply bridges the output of the stereo generator and does not load or otherwise compromise the composite/MPX signal.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Navigation Through LCD Menu THE BASICS Upon power-up, the LCD screen will display DEVA’s company logo and model of the device. DEVA Broadcast Limited SmartGen 6.0 After a few seconds this information will be replaced with the Site Name and in a while, the initial screen will disappear, replaced by SmartGen’s main screen with all the mandatory RDS...
Page 34
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com 2.AF LIST MENU >1. EDIT AF LIST 2 AF; MTD A 2. CLEAR AF LIST 2.AF LIST MENU >2. CLEAR LIST 2 AF;...
Page 35
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com 3.GROUP >1. SEQUENCE MOVE CURSOR SPIN VALUE EDIT MODE CONFIRM & BACK CONFIRM & EXIT TO TITLE 3.GROUP SEQUENCE >5. - 35 -...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com LCD MENU EXPLAINED Main Screen with Mandatory RDS Readings PS:SMARTGEN PI/CALL:FFFF PTY: Pop M TP:OFF TA:OFF MS:MUSIC PTYN:SMARTGEN This screen shows PI, PS, PTY, TP, TA, MS, PTYN, which are considered mandatory. RadioText Preview RADIOTEXT:1(1) TR:2(2)
‘Editing option’ will be locked. RESTORE FACTORY DEFAULTS SmartGen 6.0 can ‘Restore Factory Defaults’ from its non-volatile memory, when an emergency recovery is necessary. Hopefully this function will never be used. If needed, though, below is an explanation on the procedure: •...
To help get RDS on-air quickly, a very simple and intuitive Windows® interface has been included on the CD-ROM that comes with the SmartGen 6.0 encoder. This can be used by anyone to set the static IDs and flags, to program default entries into the dynamic messaging fields, and to set other operating parameters that affect how data from station automation is displayed on the radio faceplate.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com WEB Configuration SmartGen 6.0 can be accessed through Internet using any kind of WEB browser. No additional software for this purpose is required. To access the device’s Web Interface it is necessary to know the IP address of the device and the assigned password (see “Navigation Through LCD Menu”...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com BASIC RDS In this tab you will find all the essential RDS parameters needed for the Basic RDS applications. PI Code Calculator The PI code is your station’s ‘digital address’.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com TA Timeout An optional safety feature is built into the SmartGen 6.0 to guard against an extended software- activated TA flag. For example, presuming that the TA flag has been activated via software command and the data link is suddenly lost. A command that deactivates TA flag would not be received, and the TA flag would remain raised indefinitely.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Remove trailing spaces before transmitting Trims the radio text trailing spaces with carriage return symbol ($0D), when the radio text is shorter than 64 symbols.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com HOW TO ADD NEW AF, METHOD A OR METHOD B? At the right side is shown AF List. To add new AF list, follow the instructions below. How to add a new AF list by Method A 1.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com How to add a new AF list by Method B 1. Select Method B and tuning frequency (Tune); 2. Press [+Add AF]; 3.
“Selection of Operating Modes” on page 22, two types of operating modes are available. Once the SmartGen 6.0 is set, the preferred mode should be specified in the “Output” section of the encoder. The “Real Time Clock” function provides several types of Sync sources that you can choose from.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com At the right side are shown Group Sequence. To add new or RDS group into Group sequence, follow the instructions below. How to add RDS group into Group Sequence.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com How to add Site/Encoder address The procedure is identical and explained in details below 1. Press [+Add]; 2. Specify the Address by typing it in the relevant field, or via the spin control buttons, placed on the right of the edit box.
‘AF’ - List of the alternative frequencies is found on the right part of the screen. RT+ and TMC If your Radio station has RT+ or TMC – SmartGen 6.0 will display the information from those ODA Groups. - 64 -...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com GPS should be chosen as ‘Sync Source’ in order for the GPS to be available. The ‘Sync Source’ is set in the “Advanced RDS” tab (see “Advanced RDS”...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com SETTINGS General All general settings are applied through this section. From here you can specify the Site Name for easy identification of the unit. You can also easily Update the Firmware, Format the Storage or even to Reboot the device or Restore it to its Factory Defaults.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Alarms General Notification – Generally enables the type of notification/s to be used in case an alarm event is generated. NOTE: Please note that if the types of alarm notification are generally enabled (from section ‘General Notifications’), nevertheless whether the alarm is turned on, an alarm notification will not be received and the event will be stored in the Log files of the unit.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com RDS Groups • Select the preferred alarm method(s) – E-mail, SNMP or GPO. In order for the GPO notification to be enabled, the GPO port number should be specified from the drop-down menu;...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Communication UECP Communication Ports - here are listed all available communication ports. Have in mind that the different ports have some limitations as regards the settings to be applied. Below is a table indicating the settings to be applied for each of the communication ports.
Once all needed settings are applied, use the Test button to generate a test notification, which upon success will be received by the SNMP Manager. Press the ‘Download’ button to download the latest available SmartGen 6.0 SNMP MIB file. NOTE: The MIB file may vary from one firmware revision to another. Downloading this file from the device, guarantees that you have the proper MIB file.
Page 71
HTTP Server - Enable/Disable the HTTP Server. Specify the Server Port. UPnP - Enables/Disables the UPnP discovery function. RDS Stream Server – SmartGen 6.0 has a built-in, independent decoder. There is also a TCP IP server that streams rough RDS data obtained from the integrated RDS decoder. It is very convenient when RDS broadcasting control is needed.
Alternative DSN and PSN can also be specified. They are used when DSN Selection, PSN Selection functions are selected. Alternative DSN can be assigned with values from 1 to 6 (6 DSNs are available in SmartGen 6.0) and when GPI with DSN selection is activated, the DSN will become current, and Main PSN will be selected for this (alternative) DSN.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Here are listed all the Device System Events. The logs are saved in the internal device memory and can be downloaded via the built-in FTP server. (see “Log Files Maximum Age”...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Info The ‘Info’ tab shows the alarm status of each parameter, along with the basic device and network status (IP address, MAC, etc.), GPS (if it is selected as Time Sync Source), UECP Communication ports.
.The more current product seems to run more smoothly and has text editing features not found in earlier versions. NOTE: Do not connect the SmartGen 6.0 Encoder until the HyperTerminal program has been configured properly. HyperTerminal is started under Windows® XP with the command routine: Start/Programs/ Accessories/Communications/HyperTerminal.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com SERIAL COM PORT CONFIGURATION Give the encoder connection a name; we have chosen ‘RDS’ for this illustration. Click Connect using and select COM1, unless there is a reason to use another serial COM port. Click OK. - 76 -...
Page 77
None. Check your settings against the screen shot. Click OK to close all boxes and to clear the HyperTerminal data entry screen. If you experience trouble communicating with the SmartGen 6.0, there’s a quick and easy check to verify that the computer and the terminal program are functioning normally. With pins 2 and 3 of the DB-9 connector shorted with a screwdriver, whatever is typed on the keyboard should appear on the screen.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com POWER-UP Once the encoder is connected (by the serial COM) and powered-up, communications should be automatic. A notation at the bottom of the HyperTerminal screen verifies connection. Type: RDS?8 .
1-way link, however, so that the terminal screen will show what is typed. The SmartGen 6.0 has been set to ‘Echo’ as the factory default. The command to turn echo off is ECHO=08 . To turn echo back on again, type ECHO=18...
Enter key is pressed is what will be sent to the encoder. VALIDITY SYMBOLS The SmartGen 6.0 ignores ASCII inputs that do not conform to proper formatting rules. This is an important feature when the encoder is connected full-time to station automation. When a valid command is accepted by the encoder, it returns OK to the computer screen.
FIRMWARE VERSION Type: REV?8 for a display of the encoder’s firmware version. This might prove important in determining whether differences exist between SmartGen 6.0 encoders purchased at different times. NETWORK SETTINGS Type: NET?8 for a display of the encoder’s Network Settings, which include IP Address, Subnet Mask, Gateway, DNS Server and DCHP Client.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Listing of Encoder Commands and Prompts COMMAND DESCRIPTION Program Identification, 4 digit HEX number (station’s “digital address”) Program Service Name, 8 (max) ASCII characters (station’s “street name”) PSDFLT Default PS, 8 (max) ASCII characters PSTMR...
Page 83
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com G=BBBBCCCCDDDD, BBB,CCCC and DDDD are the RDS B,C and D data blocks H=BBBBCCCCDDDD, (see G), TP and PTY are preserved Group Sequence, 0A to 15A, 0B to 13B EXAMPLE: SQC=0A, 2A, 10A NOTE:...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com SNTP SNTP Server Port 123 SNTP Server Address pool.ntp.org SYSLOG SYSLOG Server Address (empty) SYSLOG Server Port 514 SMTP SMTP Server Port 465 SMTP Server mail3.host.bg EMAIL1 sg6@devamonitoring.com EMAIL2 sg6@devamonitoring.com...
For this, the reader is directed to the Specification appropriate to his location either the CENELEC EN50067 Specification for Europe or the United States NRSC Specification. Since the Manual will deal with specific implication of RDS implemented with the SmartGen 6.0, it is assumed that the user is familiar with the RDS concept.
RDS encoder by one or more service providers. Some of these applications may promise additional revenue to the station. The SmartGen 6.0 offers these capabilities and may be addressed by simple ASCII commands, either from station automation or directly from a connected computer.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com APPENDIX B.1 RDS APPLICATIONS SUPPORTED Following is an alphabetical list of the RDS applications supported by SmartGen 6.0. The standardized RDS application abbreviation is followed by an expansion of the application name and a short explanation of the function.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Enhanced Other Networks information: This feature can be used to update the information stored in a receiver about program services other than the one received. The alternative frequencies- PS name, Traffic Program and Traffic Announcement identification as well as Program Type and Program Item Number information can be transmitted for each other service.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Program Service Name: This is the station’s “street name” that will appear on the receiver faceplate display. The PS can be up to eight characters in length (including spaces) and can be as simple as the station’s call letters: KWOW or KWOW FM, or a slogan: NEWSTALK or LIVE 95.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com RadioText Plus is “semantic analogue radio”. It allows the RDS feature RadioText (RT) to be read by the FM RDS receiving terminals. Based on the RDS RT messages, RT+ is completely backwards compatible with RT.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com APPENDIX C.1 PTY Code Description Used in RBDS Mode – North America Short Name Description News News reports, either local or network in origin. Information Programming that is intended to impart advice.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com APPENDIX C.2 PTY Code Description Used in RDS Mode – Europe, Asia PTY Short Name Description News Short accounts of facts, events and publicly expressed views, reportage and actuality. Current affairs Topical program expanding or enlarging upon the news, generally in different presentation style or concept, including debate, or analysis.
Once an alarm event is generated and E-mail and HTML Template are authorized, SmartGen 6.0 will search in the folder named “\smtp_templ” for a file with extension ”.html”. The name of the file should refer to the type of event that has occurred. Below you will find a detailed list of the default HTML files.
Page 98
75 temp_hi.html 91 uecp_port_7_data_tout.html 76 temp_low.html NOTE: The SmartGen 6.0 will not be able to discover a valid file template and will use the built-in template containing plain text only, in the cases when: • A file is deleted or renamed;...
Page 99
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com Dynamic Tag Meaning Example Substitution devAlias device alias (site name) SmartGen 6.0 devSerN device serial number 12345678 devFWVer device firmware version 02.07.1206 2014/06/18 11:14:35 DSN_Crnt...
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria Tel: +359 56 820027, Fax: +359 56 836700 E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com APPENDIX E ALARMS The alarms are fast and reliable reporting mechanism in case of change in pre-defined parameters. Below you will find an explanation of the types of event that might trigger an alarm, the settings that should be applied and their properties.
A. Equipment will not be accepted for Warranty or other repair without a Return Authorization (RA) number issued by DEVA Broadcast Ltd. prior to its return. An RA number may be obtained by calling the factory. The number should be prominently marked on the outside of the shipping carton.
Your signature* *Signing this warranty registration form you are stating that all the information provided to DEVA Broadcast Ltd. are truth and correct. DEVA Broadcast Ltd. declines any responsibility for the provided information that could result in an immediate loss of warranty for the above specified product(s).
Need help?
Do you have a question about the SmartGen 6.0 and is the answer not in the manual?
Questions and answers