Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Phoenix Contact GW PL ETH/BASIC-BUS
Summarization of Contents
For your safety
Labeling of warning notes
Describes hazard symbols and signal words used in the manual.
Qualification of users
Specifies required qualifications for users of the described products.
Product changes
Notes that modifications to hardware or software are not permitted.
Safety notes
Outlines general safety precautions for installation and operation.
System description
GW PL ETH/...-BUS
Describes the head station and its capabilities on an Ethernet network.
GW PL HART...-BUS expansion modules
Details HART to Ethernet gateway modules and their features.
GW PL HART8+AI-BUS expansion module
Describes the HART8+AI-BUS module with analog input capabilities.
GW PL DIO4-BUS
Explains the four-channel digital input/output expansion module.
Installation
Mounting
Instructions for mounting the head station and expansion modules on a DIN rail.
Programming
Default settings
Details the default network configuration parameters for the device.
Login
Accessing the device's web server interface.
Configuration via web server
Managing the device via browser.
General settings
Configuration of device identification and system time.
LAN configuration
Setup of network parameters like IP address, subnet mask, and gateway.
Diagnostics
Tools for monitoring connected expansion modules and their status.
Live list
Detailed view of connected devices on an expansion module.
Protocol settings
Configuration of communication protocols like HART IP, Modbus TCP, and PROFINET.
Communication Protocol Configuration
Details on HART IP, Modbus TCP, ARCOM, PROFINET, and FDT/DTM setups.
Device maintenance
Accessing functions for device upkeep.
Restore defaults
Procedures to reset the device to factory settings.
Passwords
Changing the administrator password for web server access.
Log files
Reviewing system logs for troubleshooting.
Update firmware
Installing new firmware versions on the device.
Troubleshooting
Resetting the device
Explains hardware and software methods to reset the device.
LEDs
Describes the meaning of status indicators on the head station and expansion modules.
Technical appendix
Modbus mapping
Details Modbus slave IDs and register mapping for HART parameters.
Need help?
Do you have a question about the GW PL ETH/BASIC-BUS and is the answer not in the manual?
Questions and answers