Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sicma MLE 160
Summarization of Contents
2. General Description of the Machine
2.1 Shredder Composition
Details the main components of the shredder, including the three-point connection, frame, and PTO.
4. Identification of the Machine
4.1 Identification Plate
Describes the identification plate which contains essential machine information like type, model, and serial number.
4.2 Identification Markings
Lists Sicma shredder models and their corresponding work widths for internal and external transmission units.
4.3 Inspection of Machine Upon Delivery
Outlines the items to check upon delivery, including manuals and the declaration of conformity.
4.4 Technical Data
Provides detailed technical specifications for various shredder models, including dimensions, weight, and power requirements.
5. Safety Regulations: Adhesives and Warnings
5.1 Adhesive Labels Description
Explains the meaning and importance of various safety adhesive labels found on the machine.
7. Installation of the Machine
7.1 Application to the Tractor
Details how to connect the shredder to different tractor categories using the three-point hitch.
7.2 Transporting the Shredder
Provides instructions and safety precautions for transporting the shredder, including lifting and detachment of the shaft.
7.3 Special Protections on the Tractor
Emphasizes the need for protective measures on the tractor cab to prevent damage from sprayed objects.
7.4 Adaptation of the Cardan Shaft
Explains how to adapt the cardan shaft's length and angle for safe and proper connection to the tractor PTO.
8. Rules for Use of the Shredder
8.1 Position of the Machine in Relation to the Ground
Explains how to check and adjust the machine's position relative to the ground for optimal shredding.
8.1.1 Adjustment of the Levelling Roller and of the Scraper
Details the steps to adjust the levelling roller and scraper for correct ground contact and machine performance.
8.1.2 Adjustment Slide Rails
Instructions for adjusting the slide rails to prevent knives/hammers from touching the ground and causing wear.
8.1.3 Adjustment Third Arm
Explains how to adjust the third arm to keep the shredder parallel to the ground for effective work.
8.1.4 Work Positions of the Machine
Describes the different work positions the machine can adopt relative to the tractor.
8.1.5 Start of Work on the Soil
Provides crucial safety precautions and recommendations for starting work on the soil.
9. Ordinary Maintenance
9.1 Adjustment of the Belts and Replacement
Details the procedure for checking, adjusting, and replacing the drive belts for optimal performance and longevity.
9.2 Replacement of Knives or Hammers
Provides instructions for replacing worn or damaged knives/hammers and emphasizes using original parts.
9.3 Table of Tightening Torques
A table listing the correct tightening torques for various bolt sizes, crucial for secure assembly.
9.4 Special Accessories: Opening Hood
Safety warnings and procedures for opening and closing the maintenance hood, essential for safe access.
9.5 Table of Lubricants
A table specifying the recommended oils and greases for different parts and interventions on the shredder.
14. Warranty
14.1 Expiry of the Warranty
Lists the conditions under which the product warranty is not recognized by the manufacturer.
Need help?
Do you have a question about the MLE 160 and is the answer not in the manual?
Questions and answers