Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hardi N210
Summarization of Contents
2.0 SAFETY INFORMATION
2.1 Follow Safety Instructions
Read all safety messages and labels. Keep labels in good condition. Replace missing ones.
2.2 Operating The Sprayer Safely
Read manual before operation, ensure controls are off, operate only when seated, never allow others to ride.
2.3 Handling Chemical Products Safely
Avoid direct exposure to hazardous chemicals, use protective clothing, wash skin immediately if contact occurs.
3.0 HOOKING UP THE SPRAYER
3.1 P.T.O. Shaft Operator Safety
Always stop the engine before attaching the PTO shaft. Ensure protection guards are intact.
3.2 Installation Of P.T.O. Shaft
Instructions for attaching and shortening the PTO shaft, including angle limitations.
3.3 Power Supply (electric controls only)
Details on connecting a 12 Volt DC power supply for electric boom distribution valve solenoids.
4.0 OPERATING INSTRUCTIONS
4.1 Filling The Main Tank (all models)
Procedure for filling the main tank with water, emphasizing hose placement to prevent siphoning.
4.5 Adjustment of the EC-3 Electric Controls
Step-by-step guide for adjusting pressure, boom sections, and spraygun for EC-3 controls.
4.7 Adjustment of the ET-3 Manual Controls
Guide for adjusting pressure, boom sections, and spraygun for ET-3 manual controls.
4.11 Adjustment of the BK-3 Manual Controls
Instructions for adjusting pressure, boom sections, and the HARDI-MATIC for BK-3 controls.
4.16 Boom Height Adjustment
Explains the importance of correct boom height and how to adjust it for optimal spray patterns.
5.0 NOZZLE SELECTION
5.1 Boom Nozzle Selection
Tables detailing various spray nozzles suitable for different applications and their characteristics.
5.2 Giant End Nozzle Selection (Pasture Sprayer only)
Information on selecting Giant End Nozzles for pasture sprayers, including GPM and spray width.
5.4 Calibration (All models with standard booms)
Importance of calibration and steps for calibrating the sprayer using the ounce or formula method.
6.0 MAINTENANCE
6.1 Cleaning The Sprayer
Guidelines for thorough cleaning of the sprayer after use to ensure safety and longevity.
6.2 Filters
Information on suction and pressure filters, their importance, and cleaning procedures.
6.8 Lubrication
Recommended lubrication points and schedule for the sprayer and boom components.
9.0 TROUBLESHOOTING
9.1 General Spray Systems
Lists common problems with spray systems and their potential causes and solutions.
10.0 TECHNICAL SPECIFICATIONS
10.1 Dimensions and weights
Approximate dimensions and weights for different N-series sprayer models.
10.2 Power consumption
Minimum tractor horsepower requirements for N-series sprayers.
Need help?
Do you have a question about the N210 and is the answer not in the manual?
Questions and answers