Related Manuals for Chapman TF Series
Summarization of Contents
HSE Information for ATV Use
ATV Safety in Agriculture and Forestry
Guidance on the safe operation of ATVs in agricultural and forestry settings.
ATV Safety Overview
Overview of ATV safety advice covering types and common risks.
ATV Accident Analysis
Analysis of common ATV accident causes, including speed and terrain.
ATV Route Planning & Stability
Advice on planning routes and maintaining stability on varied terrain.
ATV Operator Training Requirements
Legal requirements and recommendations for ATV operator training.
ATV Rider Protective Clothing
Essential protective gear for ATV operation, including helmets and footwear.
ATV Passenger Safety
Guidelines for carrying passengers safely on specially adapted ATVs.
ATV Safe Driving Techniques
Key techniques for safe ATV operation, including rider positioning and slope control.
ATV Pre-Ride Safety Checks
Essential safety checks and maintenance procedures before operating an ATV.
Trailed Equipment & Load Safety
Recommendations for safely using trailed equipment and managing loads with ATVs.
ATV Sprayer Operation Safety
Safety advice for using sprayers in conjunction with ATVs.
ATV Accessories Safety Concerns
Warnings regarding the use of non-approved accessories and their impact on stability.
ATV Child Safety Guidelines
Restrictions and safety guidelines for children operating or riding ATVs.
ATV Rollover Protection & Seat Belts
Discussion on the risks and recommendations for rollover protection and seat belts.
ATV Road Use Regulations
Legal requirements for operating ATVs on public roads.
Sit-in ATV Description
Description of sit-in ATVs and comparison with other types.
Sit-in ATV Training
Training obligations for operators of sit-in ATVs.
Sit-in ATV Rollover Safety
Requirements for rollover protection and restraints for sit-in ATVs.
ATV Parking Safety
Guidelines for safely parking ATVs, especially on inclines.
HSE Further Information
Information on obtaining HSE publications and contact details.
Important Safety Information
Safety Definitions & General Rules
Defines key terms like WARNING, CAUTION, and provides general safety rules.
General Operational Safety
Essential safety practices, including manual study and hazard awareness.
Machine Transportation Safety
Precautions for safely transporting the machine, especially over rough terrain.
Operating Safety Precautions
Key safety measures during machine operation to prevent harm.
Description of the TF Series Feeder
TF Series Feeder Product Overview
General description of the TF Series Trailed Feeders and their purpose.
Machine Identification Details
Details on the information found on the machine's serial identification plate.
TF350 Technical Specification
Technical specifications for the TF350 model, including dimensions and capacity.
Component Identification
Feeder Component Diagram
Visual identification of the main parts of the trailed feeder.
Optional Equipment List
List of optional equipment and how to get more information.
Implement Decals
Importance of Safety Decals
Information on the necessity of maintaining all safety decals on the implement.
Entanglement Hazard Warning
Specific warning about entanglement hazards and keeping hands clear of moving parts.
Attachment Procedure
Attachment Pre-Checks
Essential checks to perform before attaching the feeder to the towing vehicle.
Feeder Attachment Procedure
Step-by-step instructions for connecting the feeder to the towing vehicle.
Control Cable Wiring Guide
Detailed guidance on wiring the control cable plug, including colour codes.
Drop Size Adjustment & Calibration
Initial Drop Size Setting
Instructions on setting the initial drop adjustment plate to a default value.
Drop Size Calibration
Method for calibrating the drop size by weighing deposited feed.
Spring Change / Replacement
Spring Selection for Feed Type
Guidance on identifying the correct spring for different feed types like cobs or barley.
Spring Removal Procedure
Instructions on how to safely remove the existing spring from the feeder.
Installing Stronger Spring
Procedure for replacing the old spring with a stronger one for specific feed consistency.
Sensor Change / Adjustment
Sensor/Magnet Adjustment Procedure
Steps for adjusting the sensor and magnet to resolve counting issues.
Accessing Sensor and Magnet
Visual guide on locating and accessing the sensor and magnet for adjustment.
Post-Adjustment Reassembly
Instructions for reassembling the machine after performing sensor adjustments.
Control Box Operations
2-Button Control Box Operation
Guide to operating the 2-button control box and its specifications.
4-Button Control Box Operation
Guide to operating the 4-button control box, including count and countdown modes.
Control Box Specifications
Technical specifications for both 2-button and 4-button control boxes.
Control Box Fault Codes & Troubleshooting
Explanation of fault codes and troubleshooting for the control box.
Operating Limits & Recommendations
Operating Limits
Information on operating limits, including temperature, to prevent damage or injury.
Forward Speed Effects
How forward speed affects the distance between feed drops.
Machine Storage Recommendations
Recommendations for proper storage to prevent corrosion.
Troubleshooting Guide
Troubleshooting: Unit Power
Troubleshooting steps for when the unit does not power on.
Troubleshooting: Motor Operation
Solutions for motor not operating even when the control box is on.
Troubleshooting: Counter Issues
Troubleshooting steps for when the drop counter is not functioning correctly.
Troubleshooting: Feed Dispensing
Diagnosing and resolving problems with no material being fed or inconsistent drop sizes.
Troubleshooting: Leaks & Drawbar
Troubleshooting feed leaking from the chute or excessive drawbar movement.
Warranty Information
Chapman Machinery Warranty Terms
Details of the warranty period and coverage for manufacturing defects.
Warranty Claim Conditions
Specific conditions, exclusions, and requirements for warranty claims.
Warranty Transfer Procedure
Process and conditions for transferring the machine's warranty to a new owner.
EC Declaration of Conformity
EC Declaration of Conformity
Declaration of conformity with EU Machinery Directive 2006/42/EC.
Need help?
Do you have a question about the TF Series and is the answer not in the manual?
Questions and answers