Advertisement
Combo Card jumper summary and notes
+
S218
Flat
This setting provides a tradition main-to-S218
loudspeakers are placed on (or pole-mounted just above) the subwoofers.
+
S218
Overlap
This setting optimizes the main-to-S218
loudspeakers are flown in an open space – well away from room surfaces (e.g. from a
truss).
Top card high pass filter
The Combo Card high pass filter (HPF) jumpers - J1 & J5 - should be placed in the Out
position when the front panel With Sub is selected as the LF cutoff for the F8
+
+
F12
or F15
loudspeaker is set by the motherboard main-to-sub crossover function in this
mode.
+
+
10.5
M3
F215
top card*
For use with Blackline the F215+ full range or with S218+
+
+
10.6
M3
H3A
top card*
For use with Blackline the H3/H3H
+
+
10.7
M3
218
top card*
For use with a second M3+ controller where a Blackline bi-amplified H3/H3H
* Pending. Please contact
Combo Card "Full Range" jumper configurations
+
crossover when F8
+
bi-amplified
info@martin-audio.com
All material © 2007. Martin Audio Ltd. Subject to change without notice.
+
crossover when F8
+
, F10
+
for further information.
+
+
+
, F10
, F12
or F15
+
+
+
, F12
or F15
+
, F10
+
is to be used with an S218
+
,
+
Advertisement
