Martin Audio DX1 User Manual page 25

<
CONTENTS
Appendix 2
Below are the default crossover settings and names for all configurations.
Note: these values are intended as arbitrary starting points and do not
correspond to any of the values in the factory presets.
X-over
2x2 way+Ms
2 x 3 way
4 way + 2
5 way + 1
6 way
Note: All filters set to 24dB Linkwitz-Riley.
>
PRINT
Output 1 Output 2
Low High
120Hz – 1k82Hz 1k82Hz – 22kHz
Low Mid
22.1Hz – 120Hz 120Hz – 1k82Hz
Low LoMid
15Hz – 149Hz 149Hz – 1k31Hz
Sub Low
15Hz – 80.3Hz 80.3Hz – 180Hz
LoSub Sub
15Hz – 80.3Hz 80.3Hz – 149Hz
Martin Audio – DX1 Speaker Management System
APPLICATIONS GUIDE
Output 3 Output 4
Low High
120Hz – 1k82Hz 1k82Hz – 22kHz 24.8Hz – 120Hz <10Hz – 22kHz
High Low
1k82Hz – 22kHz 22.1Hz – 120Hz 120Hz – 1k82Hz 1k82Hz – 22kHz
HiMid High
1k31Hz – 8kHz 8kHz – 22kHz
LoMid HiMid
180Hz – 1k31Hz 1k31Hz – 8kHz
Low LoMid
149Hz – 1kHz 1kHz – 4kHz
25
GUIDES
Output 5 Output 6
Msub Aux
Mid High
Aux Aux
20.1Hz – 22kHz 20.1Hz – 22kHz
High Aux
8kHz – 22kHz 20.1Hz – 22kHz
HiMid High
4kHz – 10k1Hz 10k1Hz – 22kHz