Technical Specifications - Martin Audio DX1 User Manual

<
CONTENTS
21
Inputs
Impedance
CMRR
Outputs
Source Imp
Min. Load
Max. Level
Frequency Resp.
Dynamic Range
Distortion
Maximum Delay
Output gain
Input gain
Parametric Equalisation
Filters
Filter gain
Centre frequency
Filter Q / BW
(Sections switched to shelving response)
Low frequency
High frequency
Shelf gains
High and Lowpass Filters
Filters
Frequency (HPF)
Frequency (LPF)
Response
Limiters
Threshold
Attack time
Release time
Display
Input meter
Output meter
Connectors
Inputs
Outputs
External
Power
Power
Consumption
Weight
Dimensions
Shipping Dimensions
Due to continuing product improvement the above specifications are subject to change.
>
PRINT

TECHNICAL SPECIFICATIONS

Two electronically balanced.
> 10k ohms.
>65dB 50Hz - 10kHz.
Six electronically balanced.
< 60ohms.
600ohm.
+20dBm into 600 ohm load.
±0.5dB 20Hz - 20kHz.
>110dB 20Hz -20kHz. Unwtd.
< 0.02% @ 1kHz, +18dBm.
650 ms. (Increment 2.6 µs)
adjustable +15dB to -40dB in 0.1dB steps and mute.
Adjustable +6dB to -40dB in 0.1dB steps.
5 Sections per output.
+15dB to -30dB in 0.1dB steps.
20Hz - 20kHz, 1/36 octave steps. (368 positions)
0.4 to 128 / 2.5 to 0.008
20Hz - 1kHz
1kHz - 20kHz
±15dB in 0.1dB steps.
1 of each per output.
10Hz - 16kHz, 1/36 octave steps.
60Hz - 22kHz, 1/36 octave steps.
Bessel / Butterworth 12/18/24dB per octave and
Linkwitz-Riley 24dB per octave.
+22dBu to -10dBu.
0.3 to 90 milliseconds.
4, 8, 16 or 32 times the attack time.
2 x 20 character backlit LCD.
2 x 3 point, -24dB to digital clip.
6 x 3 point, -24dB to limit level.
3 pin female XLR.
3 pin male XLR.
9 pin DEE connector (RS232)
3 pin IEC.
60 to 250V ±15% @ 50/60Hz.
< 20 watts.
3.5kg. Net (4.8kg. Shipping)
(W) 482mm x (H) 44mm x (D) 300mm
(1U)
(W) 19ins x (H) 1.75ins x (D) 11.8ins
(W) 560mm x (H) 115mm x (D) 425mm
(1U)
(W) 22ins x (H) 4.5ins x (D) 16.7ins
Martin Audio – DX1 Speaker Management System
APPLICATIONS GUIDE
(excluding connectors).
(excluding connectors).
22
GUIDES
(excluding connectors).
(excluding connectors).