Related Manuals for Theben Pharao-II 24
Summarization of Contents
Safety Guidelines and Symbols
Hardware Warnings
Explains symbols indicating hardware dangers and points of interest.
Software Warnings
Explains symbols for software precautions and points of interest.
Introduction
Applications
Lists intended and unintended applications for the PH-II series.
Special Features
Display and Communication Features
Covers LCD display capabilities, GSM communication, and PC link protocol.
Performance and Input Features
Details analog input, high-speed counter, and high current output capabilities.
Timing and Storage Features
Explains clock functions, EEPROM for data storage, and language support.
System Configuration
Applicable Programming Software
Specifies the required Pharao Software version for compatibility.
Specifications
Power Supply Specifications
Details voltage, current, and consumption for power supply.
Input Specifications
Covers AC and DC input voltage, current, impedance, and response times.
Output Specifications
Details specifications for relay and transistor outputs, including load and life cycle.
General Specifications
Covers environmental conditions, electrical safety, and standards compliance.
Installation
DIN RAIL Mounting
Explains the procedure for mounting the main unit onto a 35mm DIN rail.
Direct Mounting
Details the process for direct mounting using screw holes, including dimensions.
Extension Module Installation
Illustrates the steps for attaching an expansion module to the main unit.
Wiring
Wire Size and Preparation
Specifies wire gauges and strip lengths for connections, with preparation notes.
Power Supply Wiring
Details correct AC and DC power supply connections to the unit.
AC Power Supply and Input Wiring
Explains wiring for AC power and digital inputs for main units and 4ED models.
DC Power Supply and Input Wiring (Source)
Covers wiring for DC power and source-type inputs for main and 4EDA units.
DC Power Supply and Input Wiring (Sink)
Details wiring for DC power and sink-type inputs for main and 4EDA units.
Relay Output Wiring
Explains wiring for relay outputs on the main unit and protection details.
Relay Output Wiring (PH-II 4AR)
Describes wiring for relay outputs on the PH-II 4AR model with protection.
Transistor Output Wiring
Details wiring for transistor outputs on the PH-II 4AT model, including protection.
Terminal Layout
Extension Module Terminal Layouts
Illustrates terminal layouts for PH-II 4ED, 4EDA, 4AR, and 4AT modules.
PH-II EEPROM
EEPROM Installation Procedure
Details the steps for installing and removing the EEPROM memory cassette.
PH-232 Kabel
Connecting the PH-232 Kabel
Explains safety and connection procedures for the PH-232 cable.
PH-II GSM Kabel
GSM Kabel System Configuration
Illustrates system configurations using the PH-II GSM cable for communication.
GSM Kabel Installation
Provides safety and installation notes for the PH-II GSM cable.
Remote Maintenance with Modem
Modem Settings
Provides AT commands and settings for various modems used with the PH-II series.
Key, System Bit, and Function Block Lists
Key Lists
Lists the operation keys, their numbers, and descriptions for navigation.
System Bit Lists
Defines system bits that are controlled by the system and influence operation.
Function Block Lists
Lists available function blocks, their symbols, memory usage, and descriptions.
Diagnostics
Input Status Error Troubleshooting
Guides on checking input status displays for errors and potential causes.
Output Status Error Troubleshooting
Guides on checking output operations for errors and potential causes.
TOP MENU Display Issues
Explains how to access the Top Menu and troubleshoot display problems.
Cannot Enter Run Mode
Addresses issues preventing the controller from switching to Run mode.
Incorrect Clock Data
Explains how to confirm and correct time data, including accuracy and loss.
Question Mark Display
Explains the "?" symbol indicating an invalid key press.
Operation Key Issues
Provides troubleshooting steps when controller keys do not respond correctly.
Incorrect LCD Display
Covers troubleshooting for reversed characters, black screens, or display errors.
Memory Cassette Errors
Addresses recognition issues and functional errors with the memory cassette.
Communication Errors with Pharao Software
Guides on troubleshooting communication failures between controller and software.
Need help?
Do you have a question about the Pharao-II 24 and is the answer not in the manual?
Questions and answers