Advertisement

Quick Links

Migration Guide
netX 50 to netX 51/52
Hilscher Gesellschaft für Systemautomation mbH
www.hilscher.com
DOC120109MG05EN | Revision 5 | English | 2013-08 | Released | Public

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the netX 52 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction
Migration from netX 50 to netX 51/52
Describes differences between netX 50 and netX 51/52 for migration support.
List of Revisions
Details document revisions, dates, authors, and changes made.
Terms, Abbreviations and Definitions
Defines key terms, abbreviations, and acronyms used in the manual.
Legal Notes
Contains copyright, important notes, liability exclusion, and export information.
Comparison netX 50 with netX 51/52
Overview
Provides a general overview of the netX 50 and netX 51/52 controllers.
Key Features
Highlights the primary features and improvements of netX 51/52 compared to netX 50.
Enhancements of netX 51/52 against netX 50
Details the specific advancements and new capabilities of netX 51/52 over netX 50.
Package, Pinning, Pad Cells
netX 52
Information specific to the netX 52, including its package type and pinout.
Alternative Function at Host Interface
Describes alternative configuration of the Host Interface for SDRAM or MII.
netX 51
Details specific differences for netX 51 regarding pinning and pad cells.
MMIO Signals
Details the functionality and mapping of MMIO signals for netX 50 and netX 51/52.
General Changing
CPUs
Details the CPU cores (ARM, xPIC) used in netX 50 and netX 51/52.
Memory
Details the memory layout, addresses, and sizes for netX 50 and netX 51/52.
Peripherals
Compares the peripherals (DMAC, GPIO, SPI, I2C, etc.) of netX 50 and netX 51/52.
Improved Memory Access Performance
Discusses performance enhancements in netX 51/52 regarding memory access.
Activating 256 KByte as Dual-Port Memory and Detection of netX 51 or netX 52 Mode
Explains how to activate 256KB DPM and detect netX 51/52 mode via pull-up resistors.
Host Interface Modes
Details the configurable Host Interface modes for netX 51/52 boot process.
Miscellaneous
Covers miscellaneous topics like operating conditions and effects on software/tools.
Erratas
Fixed Erratas of netX 50
Lists errata found in netX 50 that are fixed in netX 51/52.
New Errata for netX 51 / 52
Documents new errata specific to the netX 51/52 controllers.
Design Examples
Design Example netX 51
Provides a schematic example for implementing the netX 51 COM interfaces.
Design Example netX 52
Shows a top view schematic of a design example for the netX 52.
Appendix
List of Tables
Provides a comprehensive list of all tables included in the document.
List of Figures
Provides a comprehensive list of all figures included in the document.
Contacts
Contact information for Hilscher headquarters and global subsidiaries.

Table of Contents