Related Manuals for Vanderbilt SPC6350
Summarization of Contents
2 Security
2.1 Target group
Defines the intended audience for the documentation.
2.2 General safety instructions
Provides essential safety guidelines for installation and operation.
2.3 Meaning of written warning notices
Explains the significance of different signal words used in warnings.
2.4 Meaning of hazard symbols
Clarifies the meaning of hazard symbols encountered in the manual.
3 Directives and standards
3.1 EU directives
Lists EU directives applicable to the product and compliance testing.
3.1.1 Overview of Conformity to EN50131 Standard
Details SPC product compliance with EN50131 standard requirements.
3.1.2 Compliance with EN50131 Approvals
Explains software requirements for EN50131 approval compliance.
3.1.3 Compliance with EN 50136-1:2012 and EN 50136-2:2014
States SPC product testing and approval for EN 50136 standards.
3.1.4 Compliance with INCERT Approvals
Details software requirements for INCERT approval compliance.
3.1.5 PD 6662:2010 Conformance Guidelines
Outlines configuration requirements for PD 6662:2010 conformance.
3.1.6 Compliance with VdS approvals
Describes the system's compliance with VdS approvals.
3.1.7 Compliance with NF and A2P approvals
Details compliance with NF and A2P installation regulations.
4 Technical Data
4.1 SPC4000
Provides detailed technical specifications for the SPC4000 model.
4.2 SPC5000
Provides detailed technical specifications for the SPC5000 model.
4.3 SPC6000
Provides detailed technical specifications for the SPC6000 model.
4.4 SPCP355.300
Provides detailed technical specifications for the SPCP355.300 Smart PSU.
6 Mounting system equipment
6.1 Mounting a G2 housing
Details the procedure for mounting the G2 housing.
6.2 Mounting a G3 housing
Details the procedure for mounting the G3 housing.
6.3 Mounting a G5 housing
Details the procedure for mounting the G5 housing.
7 Smart PSU
7.1 SPCP355.300 Smart PSU
Describes the components and wiring of the SPCP355.300 Smart PSU.
7.1.1 Supervised Outputs
Details the supervised outputs supported by the SPCP355.300 Smart PSU.
7.1.2 Batteries
Section dedicated to battery installation for the Smart PSU and G5 enclosure.
7.1.3 Wiring the X-BUS Interface
Explains how the X-BUS interface connects expanders and keypads to the controller.
8 Controller hardware
8.1 Controller Hardware 42xx\43xx\53xx\63xx
Describes the controller hardware for specific SPC models.
8.2 Controller Hardware SPC5350 and 6350
Describes the controller hardware for SPC5350 and SPC6350 models.
10 Wiring the system
10.1 Wiring the X-BUS interface
Explains the X-BUS interface, its configurations, and baud rate.
10.1.1 Loop configuration
Details how to configure the X-BUS in a loop topology.
10.1.2 Spur configuration
Describes the spur (open loop) cabling method for X-BUS wiring.
10.1.3 Star and multi-drop configuration
Explains star and multi-drop cabling methods for X-BUS.
10.1.4 Shielding
Details the use of shielding terminals for X-BUS cabling.
10.2 Wiring of branch expander
Describes how to wire branch expanders using X-BUS interface terminals.
10.3 Wiring the system ground
Explains the correct grounding procedure for system components.
10.5 Wiring the zone inputs
Explains how to wire zone inputs and available configurations.
10.6 Wiring an external SAB bell
Details how to wire an external SAB bell to the SPC controller.
10.7 Wiring an internal sounder
Explains how to wire an internal sounder to the SPC controller.
10.8 Wiring Glassbreak
Shows how to wire the glassbreak interface to the SPC controller.
10.9 Installing plug-in modules
Describes how to install PSTN or GSM modems on the controller board.
12 Keypad user interface
12.1 SPCK420/421
Introduces the LCD keypad and its basic functionalities.
12.1.1 Introduction
Details the components and features of the LCD keypad.
12.1.2 Using the LCD keypad interface
Explains how to navigate and use the LCD keypad interface.
12.2 SPCK620/623
Introduces the Comfort keypad models and their capabilities.
12.2.2 LED description
Explains the status indicated by the keypad's LED indicators.
12.2.3 Viewing mode description
Describes the two available viewing modes for keypad operation.
14 Starting the system
14.1 Engineer modes
Explains the two programming modes for authorized installation engineers.
14.2 Programming tools
Introduces programming tools like Keypad and SPC Pro.
14.3 Configuring start-up settings
Guides on configuring initial system settings like language and region.
14.4 Creating system users
Guides on creating system users and assigning panel operations.
14.5 Programming the portable ACE
Explains how to configure proximity card/device readers for user access.
14.6 Configuring wireless fob devices
Details programming wireless fob devices via the keypad.
16 Engineer programming via the keypad
16.1 System Status
Describes how to view system faults and status information.
16.2 Options
Details system options that can be configured, including security grade and region.
16.3 Timers
Explains various timers for system operations like bell duration and dialer delay.
16.4 Areas
Guides on configuring system areas, including ADD and EDIT functions.
16.6 X-BUS
Explains X-BUS configurations, addressing, and device management.
16.7 Wireless
Covers configuration and management of wireless sensors and WPAs.
16.8 Zones
Guides on configuring zone properties, including type, area, and attributes.
16.9 Doors
Details programming for door settings, access control, and attributes.
16.10 Outputs
Guides on configuring system outputs, including types and modes.
16.11 Communication
Covers system communication settings including serial, Ethernet, and modems.
16.12 Test
Provides procedures for testing system components like bells, sensors, and outputs.
16.13 Utilities
Covers system utilities like file management, backups, and software versions.
16.14 Isolate
Explains how to manually isolate zones, alerts, or X-BUS devices.
16.15 Event Log
Describes how to view recent system events in the EVENT LOG.
16.16 Access Log
Details how to view zone access events on the system.
16.17 Alarm Log
Explains how to view a list of alarm events in the ALARM LOG.
16.19 Users
Covers adding, editing, or deleting users based on profile rights.
16.20 User Profiles
Guides on adding and editing user profiles, including general settings and rights.
16.21 SMS
Details SMS setup and configuration for system notifications and control.
16.22 X-10
Provides information on configuring X10 devices for home automation.
16.23 Set Date/Time
Guides on manually setting the system's date and time.
16.24 Installer Text
Allows entering system and engineer contact information.
16.25 Door Control
Provides an option to control all doors of the system.
16.26 SPC Connect
Details how to set up a connection between the panel and the SPC Connect website.
17 Engineer programming via the browser
17.1 System Information
Accesses help information about the panel and licensed functionality.
17.2 Ethernet interface
Describes the Ethernet interface for connecting to the panel.
17.3 Connecting to the panel via USB
Guides on connecting the panel to a PC using a USB cable.
17.4 Logging into the browser
Details the process of logging into the system via a web browser.
17.5 SPC Home
Provides an overview of the SPC Home page with its tabs.
17.6 Panel status
Displays status and summary of SPC components: system, power, X-BUS, comms.
17.7 Logs
Provides access to system, access, WPA, and alarm logs.
17.8 Users
Covers management of users, user profiles, and devices.
17.9 Configuration
Guides on configuring various system aspects like inputs, outputs, and zones.
17.10 Configuring Communications
Details configuring communication settings like Ethernet, modems, and serial ports.
17.10.2 FlexC®
Explains the SPC Flexible Secure Communications Protocol (FlexC).
17.10.3 Reporting
Guides on configuring Alarm Reporting Centres (ARCs) for event reporting.
17.10.4 PC Tools
Introduces PC tools for system management and configuration.
17.11 File Operations
Covers operations for upgrading firmware, languages, and managing files.
17.12 Using the Fast Programmer
Explains how to use the Fast Programmer for configuration files and firmware.
18 Accessing web server remotely
18.1 PSTN connection
Guides on establishing remote access via a PSTN telephone line.
18.2 GSM connection
Guides on establishing remote access via a GSM connection.
19 Intruder alarm functionality
19.1 Financial mode operation
Describes Financial mode operation for secure areas like vaults and ATMs.
19.2 Commercial mode operation
Describes Commercial mode operation for business installations.
19.3 Domestic mode operation
Describes Domestic mode operation for residential installations.
19.4 Full and local alarms
Explains the types of alarms generated and their physical output indications.
20 System examples and scenarios
20.1 When to use a common area
Explains the use of common areas for setting multiple areas with a single keypad.
21 Seismic Sensors
21.1 Seismic Sensor Testing
Provides procedures for testing seismic sensors manually and automatically.
22 Blocking Lock Operation
22.1 Blocking Lock
Describes Blocking Lock operation and its supported device types.
22.2 Authorized Setting of the Blocking Lock
Explains the 'Authorised Setting' functionality for Blocking Locks.
22.3 Locking Element
Details the function and requirements of a Lock Element for VdS systems.
23 Appendix
23.1 Network cable connections
Illustrates network cable connections for PC to SPC controller.
23.2 Controller status LEDs
Explains the function of the controller status LEDs.
23.3 Powering expanders from the auxiliary power terminals
Guides on calculating current draw for powering expanders.
23.4 Calculating the battery power requirements
Provides guidance on calculating battery requirements for stand-by power.
23.5 Domestic, Commercial and Financial mode default settings
Lists default zone names and types for different operating modes.
23.6 Wiring of the X10 interface
Illustrates the wiring connections for the X10 interface.
23.7 SIA Codes
Provides a list of SIA codes used for event reporting.
23.8 CID Codes
Provides a list of CID codes used for event reporting.
23.9 Overview of keypad types
Compares features of different keypad models.
23.10 User PIN combinations
Details user PIN combinations and variations based on digit count.
23.11 Duress PINs
Explains the configuration and usage of Duress PINs.
23.12 Automatic inhibits
Describes automatic inhibit functions for zones and access PINs.
23.13 Wiring of mains cable to the controller
Details requirements for wiring the mains cable to the controller.
23.14 Maintenance controller
Provides guidance on controller maintenance and checks.
23.15 Maintenance Smart PSU
Details maintenance procedures for the Smart PSU.
23.16 Zone types
Provides a description of each available zone type on the SPC system.
23.17 Zone attributes
Explains how zone attributes determine programmed zone type functions.
23.19 ATS levels and attenuation specifications
Lists ATS levels and attenuation specifications for communication paths.
23.21 SPC Support for E-Bus Devices
Details SPC support for E-Bus devices and their configuration.
23.22 FlexC Glossary
Provides definitions for acronyms used in the FlexC protocol.
23.23 FlexC Commands
Lists commands that can be enabled for a command profile in FlexC.
23.24 ATS Category Timings
Describes timings for ATS categories in EN50136-1 and FlexC.
Need help?
Do you have a question about the SPC6350 and is the answer not in the manual?
Questions and answers