Related Manuals for Vanderbilt SPC53 Series
Summarization of Contents
Security
Target Group
Defines the intended audience for the documentation, outlining their roles and qualifications.
General Safety Instructions
Provides essential safety warnings and guidelines for installation, operation, and maintenance.
Directives and Standards
EU Directives
Details compliance with European directives for electromagnetic compatibility and low voltage.
Overview of Conformity to EN50131 Standard
Summarizes SPC product compliance with EN50131 standards, including certifying body and product types.
PD 6662:2010 Conformance Guidelines
Provides criteria for installation, commissioning, and maintenance to conform to PD 6662:2010.
Compliance with VdS approvals
Details installation information and software requirements for VdS approvals.
Compliance with NF and A2P approvals
Specifies regulations for NF & A2P installations, including enclosure sealing requirements.
Technical Data
SPC4000 Technical Specifications
Detailed technical specifications for the SPC4000 series, including zones, PINs, outputs, and interfaces.
SPC5000 Technical Specifications
Detailed technical specifications for the SPC5000 series, covering areas, PINs, outputs, and connectivity.
SPC6000 Technical Specifications
Detailed technical specifications for the SPC6000 series, including zones, PINs, outputs, and expander capacity.
SPCP355.300 Technical Specifications
Technical specifications for the SPCP355.300, including zones, outputs, interfaces, and power requirements.
Mounting System Equipment
Mounting a G2 Housing
Instructions for mounting the G2 housing, including cover removal and wall mounting procedures.
Mounting a G3 Housing
Guidance on mounting the G3 housing, covering cover opening and internal component layout.
Mounting a G5 Housing
Instructions for mounting the G5 housing, detailing cover attachment and component placement.
Smart PSU
SPCP355.300 Smart PSU
Describes the SPCP355.300 Smart PSU, its components, and wiring.
Supervised Outputs
Details supervised outputs, open-drain logic, and tamper detection for the SPCP355.300 Smart PSU.
Batteries
Information on battery installation, testing, deep discharge protection, and stand-by times.
Wiring the X-BUS Interface
Explains X-BUS interface wiring for expanders and keypads, including cable types and distances.
Controller Hardware
Controller Hardware 42xx\43xx\53xx\63xx
Description of the controller PCB for SPC42xx, 43xx, 53xx, and 63xx models.
Controller Hardware SPC5350 and 6350
Description of the controller hardware for SPC5350 and 6350 models, including connections and features.
Wiring the System
Wiring the X-BUS Interface
Explains X-BUS interface wiring configurations: loop, spur, star, and multi-drop.
Wiring of branch expander
Details wiring for branch expanders on the X-BUS interface.
Wiring the system ground
Specifies how to connect system ground (0V) for SPC controllers, keypads, and expanders.
Wiring the relay output
Explains how to wire the SPC controller's on-board relay output for driving devices like external bells.
Wiring the zone inputs
Describes wiring methods for zone inputs, including NEOL, SEOL, DEOL, and Anti-masking PIR configurations.
Wiring an external SAB bell
Provides wiring instructions for connecting an external SAB bell to the SPC controller.
Wiring an internal sounder
Details how to wire an internal sounder to the SPC controller's 12V sounder input.
Wiring Glassbreak
Explains how to wire the glassbreak interface to the SPC controller or expander.
Installing plug-in modules
Instructions for installing PSTN or GSM modems on the controller board.
Powering up the SPC Controller
Powering from Battery Only
Guidance on powering the system solely from a battery, including voltage requirements.
Keypad User Interface
SPCK420/421 Keypad
Introduction to the SPCK420/421 LCD keypad, its features, and capabilities.
Using the LCD Keypad Interface
Explains how to use the LCD keypad interface, including navigation and key functions.
SPCK620/623 Keypad
Introduction to the SPCK620/623 Comfort keypad, its features, and enhancements.
Starting the System
Engineer Modes
Describes the two programming modes: Full Engineer and Soft Engineer.
Programming Tools
Overview of programming tools including Keypad, SPC Pro, and Fast Programmer.
Configuring Start-up Settings
Guidance on setting up initial system configurations like language, region, and installation type.
Configuring Wireless Fob Devices
Instructions for programming and disabling wireless fob devices via the keypad.
Engineer Programming via the Keypad
System Status
Displays system faults including open zones, alerts, soak tests, and battery status.
Options
Configuration options for Security Grade, Region, and Application type.
Timers
Configuration of various timers for audible alarms, confirmation, and system operations.
X-BUS
Configuration and management of X-BUS devices including addressing, refresh, and reconfigure.
Wireless
Configuration and management of wireless sensors, WPAs, and antenna settings.
Zones
Configuration of zone properties including description, type, area, and attributes.
Doors
Configuration of door inputs, groups, attributes, and timers for access control.
Outputs
Configuration of output types and ports, including system and area outputs.
Communication
Configuration of serial ports, Ethernet ports, modems, and central station connections.
Test
Procedures for testing system components like bells, sensors, and outputs.
Utilities
System utilities for managing software versions, defaults, backups, and configurations.
Isolate
Manual isolation of zones, system alerts, or X-BUS device alerts.
Event Log
Viewing recent system events displayed in the EVENT LOG option.
Access Log
Viewing zone access details displayed in the ACCESS LOG option.
Alarm Log
Displays a list of alarm events, including zones and system events.
Change Engineer Pin
Procedure for changing the Engineer PIN.
Users
Management of users, including adding, editing, and deleting user profiles.
User Profiles
Configuration of user profiles, including general settings, panel rights, and access control.
SMS
Configuration of SMS alerts and remote control features via SMS.
X-10
Configuration settings for X-10 devices for controlling lights and appliances.
Set Date/Time
Manual entry and configuration of the system's date and time.
Installer Text
Setting for entering system information and engineer contact details.
Door Control
Functionality to control all doors of the system.
SPC Connect
Setup for connecting to the SPC Connect website for remote panel access.
Engineer Programming via the Browser
System Information
Accessing help menus for up-to-date panel and licensed functionality information.
Ethernet Interface
Details on connecting to the panel via Ethernet, including IP address configuration.
Connecting to the Panel via USB
Procedure for connecting the panel to a PC using a USB cable and installing drivers.
Logging into the Browser
Steps for accessing the panel via a web browser using its IP address.
SPC Home
Overview of the SPC Home page with System Summary, Alarms, and Video tabs.
Panel Status
Displays status and summary of SPC components, including system, power, X-BUS, and communications.
Logs
Viewing system, access, WPA, and alarm logs for event tracking.
Users
Management of users, including adding, editing, and assigning access rights and profiles.
Configuration
Browser-based configuration of controller inputs/outputs, X-BUS, wireless, system settings, and zones.
Accessing Web Server Remotely
Remote access procedures via PSTN and GSM connections.
Intruder Alarm Functionality
Financial Mode Operation
Alarm modes for financial environments, focusing on secure areas like vaults and ATMs.
Commercial Mode Operation
Alarm modes for business installations with multiple areas and zones.
Domestic Mode Operation
Alarm modes for residential installations with areas and alarm zones.
Full and Local Alarms
Describes how SPC system generates alarms and activates physical outputs.
Seismic Sensors
Seismic Sensor Testing
Procedures for manual and automatic testing of seismic sensors.
Blocking Lock Operation
Blocking Lock
Details on normal and Bosch Blockschloss devices, and their operation requirements.
Authorized Setting of the Blocking Lock
Explanation of the second security level for setting/unsetting a Blocking Lock.
Locking Element
Mandatory prevention of entering set areas using a Lock Element for VdS compliance.
Appendix
Network Cable Connections
Wiring diagrams for connecting the SPC controller to a PC via Ethernet or LAN.
Controller Status LEDs
Description of LED functions for wireless data, battery status, mains supply, and X-BUS.
Powering Expanders from Auxiliary Power Terminals
Guidance on calculating current draw and power requirements for expanders.
Calculating Battery Power Requirements
Method for approximating maximum load current from batteries for stand-by periods.
Domestic, Commercial and Financial Mode Default Settings
Default zone names and types for each operational mode.
Wiring of the X10 interface
Diagrams and PIN assignments for wiring the X10 interface to the controller.
SIA Codes
List of SIA codes used for alarm reporting and event description.
CID Codes
List of CID codes used for alarm reporting and event description.
Overview of Keypad Types
Comparison of Standard, PACE, and Comfort keypad models and their features.
User PIN Combinations
Details on PIN digit combinations and variations for user and engineer PINs.
Duress PINs
Configuration of duress PINs and their impact on PIN allocation and user codes.
Automatic Inhibits
System support for automatic inhibits based on zones and access PIN attempts.
Wiring of mains cable to the controller
Requirements and procedures for safely wiring the mains cable to the controller.
Maintenance Controller
Service schedule and checks for the controller, including replaceable parts.
Maintenance Smart PSU
Service schedule and checks for the Smart PSU, including fuse and battery replacement.
Zone Types
Brief description of each programmable zone type available on the SPC system.
Zone Attributes
Explanation of zone attributes and how they determine programmed zone type functions.
Applicable Attributes to Zone Types
Table showing which attributes are applicable to each zone type.
ATS Levels and Attenuation Specifications
Lists ATS levels and attenuation specifications for GSM, PSTN, Ethernet, and GPRS.
Supported Card Readers and Card Formats
Compatibility list of card readers and formats supported on the SPC system.
SPC Support for E-Bus Devices
Information on configuring and addressing Sintony E-Bus devices with the SPC controller.
FlexC Glossary
Definitions of acronyms and terms used in the FlexC protocol.
FlexC Commands
List of commands that can be enabled for a command profile to control a panel via SPC Com XT.
ATS Category Timings
Describes EN50136-1 ATS Category Timings and FlexC implementation standards.
Need help?
Do you have a question about the SPC53 Series and is the answer not in the manual?
Questions and answers