Remote Control; The Cr10 Remote Control; Cd Player Commands - Arcam FMJ CD17 Handbook

remote
control

The cR10 remote control

The CR10 is pre-programmed for use with the CD17
CD player and Arcam amplifiers such as the A28 and
A38.
The CR10 requires a clear line of sight to the front panel
display of CD17 to ensure reliable operation. Make sure
you have inserted the two AAA batteries supplied before
attempting to use the CR10.
inserting batteries into the

remote control

1. Squeeze the tab and lift off the remote control's
battery compartment cover.
2. Insert the two ' A AA' batteries supplied in the
proper direction, following the '+' and '–'
marks in the battery compartment.
3. Replace the battery compartment cover,
locking the tab with a click.
����
���� ���������
����� ���� ��� ���
� � �
� � �
� � �
�
�����
����
����� ����
����
��� ��� �� ���
��� ��� �� ���
���� ���� ��� ����
���� ���� ����
���������
����
e-8

cd player commands

Cycles through the front panel display's
DiSp
brightness options (dim to bright, off).
info Toggle track display mode (for details, see
page 7).
Toggles random ('shuffle') play on and off
Shuff
prog Allows the programming of a selection of
up to 24 tracks from a disc to play in any
order (for details, see page 7).
A-B repeat function (for details, see page 7).
a–b
Cycles through repeat options (track, disc,
rpt
etc.). For details, see page 7.
to The numeric keys allow direct access to
0 9
individual tracks on the disc. To select
a track, press the corresponding keypad
button. For tracks greater than 9, enter the
digits in sequence. For example, to play
track 15, press and hold until the number
1
on the display moves to the left, then press
Open/close disc tray
1
Toggles the mute function, if available.
-
By default this key always operates the AMP
Mute
Play
4
pLay
Pause playback
;
pauSe
Stop playback
<
Stop
Decrease ( ) or increase ( )
VoL –
VoL– VoL+
amplifier volume
VoL +
Fast search backwards
7
Fast search forwards
8
Press and release to skip back to the
0
beginning of the current/previous track.
Press and release to skip forwards to the
/
beginning of the next track.
.
5