Mode Key Ir Punch-Through; Resetting The Cr100 - Arcam CR100 Handbook

Mode key IR punch-
through
The Mode key IR punch-through
default is 'on'.
Example: To set the Mode key IR
punch-through to aMP
1. Press and hold
LED blinks twice:
2. Press
�
�
blinks twice:
3. Press to punch through IR
���
from it.
Now, whenever you press and release
a Mode key, the IR data assigned to
is transmitted, no matter what
aMP
the current mode is (i.e. it 'punches
through' any other device).
To cancel Mode key IR punch-
through:
1. Press and hold
LED blinks twice:
2. Press
�
�
blinks twice:
3. Press until the power LED
�����
blinks twice:
CR100
E-20
until the power
�����
.
. The power LED
�
.
until the power
�����
.
. The power LED
�
.
.
Resetting the
CR100
Resetting the CR100 will erase all
learned functions across all modes,
as well as some other programmed
functions like Macros. It will not reset
the Device Mode keys; these will
remain programmed to your choice of
component.
1. Press and hold
LED blinks twice:
2. Press
�
�
blinks four times:
.
until the power
�����
.
. The power LED
�