Tun Mode - Arcam CR100 Handbook

TUn mode

Toggles power between
stand-by and on.
Functions as original
�
remote number key.
to
�
Selects Tape input on
����
amplifier
Selects FM band
���
Modifies many keys (see
�����
individual key descriptions,
below)
Selects multichannel
���
(MCH) input on amplifier
Selects AM band
���
Navigate setup and
programme selection
menus.
selection.
B
SHIFT
C
SHIFT
Confirms a setting
(equivalent to 'Enter' or
'Select' on some remotes)
Cycles through different
����
frequency bands.
Functions as original
����
remote key, if available
Cycles through the front
����
panel display's brightness
options (dim to bright, off)
Toggles the mute function,
if available.
By default this key always
operates the AMP Mute.
Sends Preset Down
command
Sends Preset Up command
Decrease (
( ) amplifier volume
+
Fast rewind (DAB rewind
radio)
Play (DAB rewind radio)
Toggles pause of playback
(DAB rewind radio)
Fast forward (DAB rewind
radio)
���
confirms a
ok
to Power on
to Power off
) and increase
–
Selects FM band on the
DAB tuner
Stops playback (DAB
rewind radio)
Start recording (DAB
rewind radio)
Selects DAB band on the
����
DAB tuner
Toggles FM tuner mode
�����
between FM Mute mode
and Mono mode on Arcam
Receivers and Tuners.
Toggles between Preset
�����
and Tune mode on Arcam
Receivers and Tuners.
Stores tuner preset on
�����
Arcam Receivers and
Tuners.
Cycles through RDS radio
����
display modes for Arcam
Receiver and Tuners.
CR100
E-11