Controlling The Bdp100 - Arcam BDP100 Handbook

controlling the bdP100

The Cr104 is a sophisticated 'universal' remote control
that can control up to eight devices – including the
BDP100. As it's a 'learning' remote, it can copy almost
any function from an existing single-device remote.
You can also program the Cr104 to issue a sequence of
commands ('macros') from a single button press.
Select the source key first
remember to select a source key before pressing
command buttons – commands vary depending on the
source selected.
To operate the BDP100 from the remote, first press the
source button.
BD
SAT AV
TUN
PVR VCR
AMP CD
DISP (display)
Press to cycle through the front panel display's
brightness options (dim to bright, off).
Source selection and handset configuration
BD BD input/BD controls
SaT Satellite decoder input/SAT controls
Television (sound) input/AV controls
aV
radio tuner input/TUn controls
TuN
Arcam amplifier
aMP
PVR Personal Video recorder input/controls
Video Cassette recorder input/controls
VCR
CD player input/CD controls
CD
Press the relevant button once to select input and
reconfigure the handset.
Press and hold the button until the power LED blinks
once if you wish to reconfigure the handset without
changing the input.
Navigation buttons
Arrow buttons allow navigation around the settings
menus on the BDP100 and disc menus.
Confirm a selection by pressing .
OK
MODE
This button activates the Picture-in-Picture Secondary
Video function, where available.
MuTE
Press once to mute an Arcam amplifier. Press again (or
use volume) to un-mute.
+/–
VOLuME +/–
Adjusts the volume of a compatible amplifier.
OPEN
Opens and closes the disc tray
SETuP
Press to access the system settings menu.
SETuP
T
DISP RND
SHIFT STATUS iPOD
SAT AV
BD TUN
VCR
PVR
AMP CD
MODE MENU
RTN
U
SRCH
SETUP TITLE AUDIO SUBT
23425
CR104
e-12
On/Stand-by
This allows the BDP100 to be put into and taken out of
stand-by remotely.
Numeric keys
Used for data entry. Also gives direct access to
individual tracks on audio CDs.
RND
Toggles random ('shuffle') play of chapters/tracks on
and off.
Press followed by to cycle through repeat play
SHIFT RND
options (chapter, title, disc, etc.).
STaTuS
Toggles the disc information display.
Press followed by to activate or deactivate
SHIFT STaTuS
24p mode (supported discs and TVs only).
MENu
Activates the BD 'popup' menu or the DVD disc menu.
RTN
navigates to the previous menu.
0 /
Press to skip backwards to the previous track( 0 ) or
forwards to the next track ( / ).
Playback control
Pause ( ; ), Play ( 4 ) and Stop ( < ). SHIFT+Pause
activates slow playback.
advanced controls
These buttons are described on the next page.