Download Print this page
Daikin RKS71HVM Service Manual

Daikin RKS71HVM Service Manual

Removal procedure 6.0/6.3/7.1 kw class 24000/28000 btu/h class
Hide thumbs Also See for RKS71HVM:

Advertisement

REMOVAL
PROCEDURE
S E R V I C E
6.0/6.3/7.1 kW Class
24000/28000 Btu/h Class
Outdoor Unit
Inverter
Pair Type
Si001271EE
M A N U A L

Advertisement

loading
Need help?

Need help?

Do you have a question about the RKS71HVM and is the answer not in the manual?

Questions and answers

Summarization of Contents

Outer Panels Removal
Suction and Top Panel Removal
Procedure to unfasten hooks and remove screws for suction and top panels.
Side and Front Panel Extraction
Steps to remove right side panel and front panels by unfastening hooks and screws.
Rear Panel Assembly Removal
Procedure to remove the rear panel by unfastening hooks and removing screws.
Electrical Box Component Removal
Electrical Box Mounting and Wiring Disconnection
Steps to remove screws and detach earth/ground wires from the electrical box mounting.
Harness and Connector Disconnection
Procedure for disconnecting fan motor lead wire and front side connectors.
Electrical Box Unit Extraction
Steps to release thermistor harness, disconnect compressor relay, and remove the electrical box.
Printed Circuit Board (PCB) Extraction
Service Monitor PCB Removal
Procedure to remove the electrical box cover and disconnect service monitor PCB.
Main PCB Extraction
Steps to disconnect harnesses and remove the main PCB from the unit.
Fan Motor Removal Procedure
Fan Motor Screw Fasteners
Instructions for removing lower and upper screws securing the fan motor.
Fan Motor Extraction
Procedure for safely removing the fan motor from its mounting.
Coils and Thermistors Removal
Valve Coil Extraction
Steps to remove the electronic expansion valve coil and four way valve coil.
Thermistor Disconnection
Procedures for removing outdoor heat exchanger and discharge pipe thermistors.
Sound Blankets Removal
Outer and Top Sound Blanket Removal
Steps to open and remove outer and top sound blankets.
Inner Sound Blanket Extraction
Procedure for removing the inner sound blanket from the unit.
Compressor Removal and Handling
Compressor Terminal Cover and Lead Wires
Procedure to remove the terminal cover and pull out compressor lead wires.
Compressor Extraction Procedure
Steps to remove overload protector, heat brazed parts, and the compressor.