Table of Contents
Troubleshooting
Related Manuals for Canon MF6100 Series
Summarization of Contents
Safety Precautions
CDRH Provisions
Provisions for laser and laser products enforced by FDA.
Laser Safety
Information on laser radiation hazards and handling precautions.
Toner Safety
Precautions related to toner handling and explosion risks.
Notes When Handling A Battery
Warnings and precautions for battery handling and disposal.
Notes On Assembly/Disassembly
Guidelines for device assembly and disassembly procedures.
Product Overview
Product Lineups
Details on available product models and their configurations.
Product Features
Highlights of the product's key features and compact design.
Specifications
Technical specifications for the main unit, ADF, and FAX systems.
Name of Parts
Identification of external components of the MF5900/6100 and D1300 series.
Technical Overview
Basic Configuration
Overview of the device's six main functional blocks.
Basic Sequence
Explanation of the operational sequence controlled by the engine controller.
Print Sequence
Timing chart illustrating the sequence of operations during printing.
Print Mode
Details on different print modes and their feeding speeds.
Document Exposure / Delivery System
Information on components and specifications for scanning documents.
Fixing System
Explanation of the fixing assembly and its temperature control.
Pickup / Feed System
Overview of the media feed system and its roller configuration.
Periodical Services
Periodically Replaced Parts
Information on parts that do not require periodic replacement.
Consumable Parts
List of consumable parts with product numbers and quantities.
Periodical Service
Information regarding periodic service requirements for the product.
Cleaning
Methods for cleaning various components of the machine.
Disassembly/Assembly
List of Parts
Identification of external parts for MF5900/6100 and D1300 series.
Main Unit
Diagram showing the main components of the printer unit.
Main Parts
Identification of sensors and switches within the main unit.
PCB
Location and identification of various printed circuit boards in the machine.
Connector Layout Drawing
Diagrams illustrating connector locations and their corresponding parts.
External Cover (D1300 Series)
Procedure for removing the left cover unit of the D1300 series.
External Cover (MF5900/MF6100)
Procedure for removing the left cover unit of the MF5900/MF6100 series.
Document Exposure / Delivery System
Procedure for removing the ADF Unit and Reader Unit.
Controller System
Procedure for removing the main controller board.
Adjustment
Overview
Introduction to adjustment measures after replacing parts.
Document Exposure / Delivery System
Adjustment procedures after replacing CIS, ADF, and Reader units.
Controller System
Procedures for adjustment after replacing the Main Controller PCB.
Trouble Shooting
Test Print
Information on engine-test pages and controller test prints.
Trouble Shooting Items
Special modes to solve print quality troubles.
Nip-width Specifications
Procedure for checking the nip-width of the fixing assembly.
Version Up
Overview of upgrading methods and firmware configuration.
Error Codes
Overview
Explanation of error and jam codes displayed on the machine.
Error Code
Detailed list of error codes, their detection descriptions, and remedies.
Jam Code
Explanation of jam code structure and location/position codes.
Service Mode
Overview
Explanation of the service mode menu structure and backing up settings.
COPIER
Service mode settings for copier functions like display and version.
FEEDER
Service mode settings for feeder adjustments and operation checks.
FAX
List of SSSW functions and menu switch registrations for FAX.
TESTMODE
Test modes for printing, modem, and faculty functions.
Appendix
Service Tools
List of special tools required for servicing the machine.
Solvents and Oils
Standard tools and materials used in service works.
General Timing Chart
Timing chart illustrating consecutive print operations.
General Circuit Diagram
Electrical circuit diagrams for the machine.
Backup Data
Table showing data backup and initialization procedures.
Need help?
Do you have a question about the MF6100 Series and is the answer not in the manual?
Questions and answers