Table of Contents
Advertisement
Bearing Packing
Instructions
Read and adhere to the following instruc-
tions; failure to read and obey all of the following
instructions comPletely will void the warranty
and can result in damage to the trailer, property
damage, or seRIous PeRsonal InjuRy.
Whenever a hub is disassembled (if a hub on a new
unit requires assembly or a hub is disassembled for main-
tenance), the following procedure must be followed.
1.
Using a suitable solvent, thoroughly clean the bearings
and the rest of the parts in the Hub assembly of all
grease, dirt, metal shavings, or any other foreign object.
the parts must be cleaned even if they are new or
appear clean.
2.
Allow all pieces to dry completely.
3.
Make sure that your hands are thoroughly clean and the
bearing packer (not included) is also thoroughly clean.
4.
Place fresh, clean bearing grease in the packer.
5.
With the grease-filled bearing packer in one hand and the
bearing in the other, press the bearing into the grease,
forcing the grease inside the slots in the bearing, continue
doing this until every slot in the bearing is completely full
of grease.
6.
Finish assembling the hub/wheel assembly as explained
in the manual, being careful not to get any dirt or debris
on any part of the assembly.
save these InstRuctIons.
Important
Advertisement
Table of Contents
