Vehicle Load Limit - CHICAGO 42708 Owner's Instructions Manual

Diy trailer kit
Table of Contents

Advertisement

4.
If the tire pressure is too low, note the difference
between the measured tire pressure and the
correct tire pressure. These "missing" pounds
of pressure are what you will need to add.
5.
At a service station, add the missing pounds of
air pressure to each tire that is underinflated.
6.
Check all the tires to make sure they have the
same air pressure.
7.
If the tires' pressure was not measured "cold",
then the pressure should be rechecked with
the tires cold as soon as possible.
Tire Size
To maintain safety, only purchase new tires
of the same size as the original tires. Look at the Tire
and Loading Information Placard, the Specifications
Chart in this manual, or the sidewall of the tire being
replaced. If you have any doubt about selecting the
correct size, consult a tire dealer.
Tire Tread
The tire tread provides traction that prevents
your vehicle from slipping, especially if the road is wet
or icy. Tires are unsafe and should be replaced when
the tread is worn down to 1/16". Measure tread depth
using a tread depth indicator (not included).
Tire Rotation
Every 5,000 miles the left and right tires
should be switched. This will cause the tires to wear
more evenly and last longer.
Tire Balance and alignment
The tires need to be balanced to prevent
vibration when driving. This involves attaching small
weights to the rim to offset small differences in rim
and tire weight. The tires also need to be aligned
properly. Alignment is the orientation of the tires to
the road surface and their being parallel. This helps
the tires to wear evenly, and provide better traction.
Both tire balance and alignment require specialized
equipment that is not provided with this vehicle.
SKU 42708
needs to be properly plugged and patched from the
inside of the tire. Tread punctures can be repaired
if they are not too large. Sidewall punctures should
not be repaired, the tire needs to be replaced if the
sidewall is damaged. Tires should be removed from
the rim to be inspected before being plugged and
patched. A qualified mechanic should remove the
tire from the rim, perform the repair, and remount
the tire.

VEHiCLE LoaD LimiT

Steps for Determining Correct
1.
Locate the statement "The weight of cargo
should never exceed XXX kilograms or XXX
pounds" on your vehicle's placard.
2.
That figure equals the available amount of
cargo and luggage load capacity.
3.
Determine the combined weight of luggage and
cargo being loaded on the vehicle. That weight
may not safely exceed the available cargo and
luggage load capacity.
4.
If the trailer's load exceeds the cargo and
luggage load capacity, then the trailer be
unsafe resulting in hazardous effects, such
as: Trailer's tires will not be able to maintain
traction properly, and stopping distance will be
increased significantly.
For technical questions, please call 1-800-444-3353.
Tire Repair
To properly repair a punctured tire, the hole
Load Limit
REV 07f, 09b, 09g

Advertisement

Table of Contents
loading

Table of Contents