Table of Contents
Advertisement
bearing packing
inSTrucTionS
important
read and adhere to the following
instructions; failure to read and
obey all of the following instructions
coMpleTelY will void the warranty
and can result in damage to the
trailer, property damage, or SeriouS
perSonal inJurY.
Whenever a hub is disassembled (if
a hub on a new unit requires assembly or a
hub is disassembled for maintenance), the
following procedure MuST be followed.
1.
Using a suitable solvent, thoroughly clean
the bearings and the rest of the parts in
the Hub assembly of all grease, dirt, metal
shavings, or any other foreign object. The
parts must be cleaned even if they are
new or clean.
2.
Allow all pieces to dry completely.
3.
Make sure that your hands are thoroughly
clean and the bearing packer (not
included) is also thoroughly clean.
4.
Place fresh, clean bearing grease in the
packer.
5.
With the grease-filled bearing packer in
one hand and the bearing in the other,
press the bearing into the grease, forcing
the grease inside the slots in the bearing,
continue doing this until every slot in the
bearing is completely full of grease.
6.
Finish assembling the hub/wheel assembly
as explained in the manual, being careful
not to get any dirt or debris on any part of
the assembly.
Page 24
For technical questions, please call 1-800-444-3353.
SKU 42709
Advertisement
Table of Contents
