Advertisement
Advertisement
Table of Contents
Related Manuals for Garmin GAP 26
Summarization of Contents
Overview and System Description
Overview
Provides a general introduction to the Garmin AOA System's purpose and functionality.
System Description
Details the components of the Garmin AOA System and how they interact.
GI 260 Controls and Operation
GI 260 Controls
Identifies and explains the function of the GI 260 unit's controls.
Self Test Procedure
Describes how to perform a self-test on the GI 260 for verification.
Mute Functionality
Explains how to mute audible alerts from the GI 260.
System Operation Modes
Start-Up Behavior
Details the system's behavior and alerts during the start-up sequence.
Normal Operation
Describes the standard operational states and visual/aural feedback.
Power-Up Sequence
Explains the cycling of annunciators during system power-up.
System Arming
Details the conditions under which the AOA system becomes armed.
Angle of Attack Indications
Cruise Configuration Annunciations
Describes the annunciator states during normal cruise flight.
Approach Configuration Annunciations
Explains annunciator behavior as AOA increases for approach.
Approach AOA Reference
Defines the reference point for approach calibration and performance.
Low AOA with Approach Reference
Indicates a low AOA approach via specific annunciator illumination.
Approach AOA
Describes the condition for achieving the desired approach angle of attack.
High AOA with Audible Alert
Alerts for high AOA during approach, indicated by yellow annunciators and sound.
Warning AOA with Audible Alert
Indicates critical AOA with red annunciators and a fast audible alert.
Example Approach Simulation
Recommends simulating approaches to verify AOA system alignment.
Approach Calibration
Guidance on calibrating the system for optimal approach performance.
Typical Decelerating Approach
Illustrates AOA indications during a decelerating approach and flare.
Abnormal Operation and Warranty
Limited Warranty
Details the warranty terms, coverage, and exclusions for Garmin avionics products.
Abnormal Operation
Covers system malfunctions and procedures for handling abnormal conditions.
AOA System Failure
Procedure for powering down the system in case of malfunction.
Nuisance Alerts
How to mute audible alerts that are perceived as nuisances.
Need help?
Do you have a question about the GAP 26 and is the answer not in the manual?
Questions and answers