Related Manuals for TEXIO DCS-1102B
Summarization of Contents
Getting Started
Main Features
Describes the primary features of the DCS-1000B oscilloscope, covering display, sampling rate, and memory.
Accessories
Lists standard, optional, and accessory items included with or available for the oscilloscope.
Set Up
Provides instructions for initial setup procedures, including tilt stand and power connection.
Built-in Help
Explains how to access and use the oscilloscope's context-sensitive help menu for panel operations.
Measurement
Basic Measurement
Covers fundamental operations for capturing and viewing input signals, including channel activation and autoset.
Automatic Measurement
Details the automatic measurement functions for voltage, time, and delay, including available measurement items.
Cursor Measurement
Explains how to use horizontal and vertical cursors to measure waveform parameters and results.
Math Operation
Describes basic and advanced math functions like addition, subtraction, multiplication, division, and FFT.
Configuration
Acquisition
Covers acquisition modes like Sample, Peak Detect, and Average, and setting record length.
Segmented Memory Acquisition
Explains optimizing memory by dividing it into segments for capturing specific signal events.
Display
Details display settings such as waveform format (dots/vectors) and persistence level.
Horizontal View
Covers horizontal scale, position adjustment, and waveform update modes like Normal and Roll.
Vertical View (Channel)
Explains vertical scale, position, coupling modes, input impedance, and bandwidth settings.
Bus Key Configuration
Details configuration for serial bus inputs (UART, I2C, SPI, CAN, LIN) and bus display.
Trigger
Explains trigger types, parameters, holdoff, and various trigger modes for signal capture.
Search (Option)
Describes how to use the search feature to find events on analog input channels based on settings.
System Settings
Covers system settings like menu language, viewing system information, and erasing memory.
Applications
Overview
Introduces the APP function for running software applications like Go-NoGo, DVM, and Data Logger.
Running Applications
Provides steps on how to launch and navigate through different applications available on the oscilloscope.
Using Go-NoGo
Explains how to perform Go-NoGo tests to check if waveforms fit within specified boundary conditions.
Using the DVM (Option)
Details the Digital Voltmeter application for measuring AC RMS, DC, and frequency of input signals.
Using the Data Logger (Option)
Describes the Data Log application for saving waveform data or screenshots at set intervals.
Using the Digital Filter (Option)
Explains the digital filter application for applying high or low pass filters with selectable cutoff frequencies.
Remote Disk
Details the Remote Disk application for mounting and accessing network share drives.
SAVE/RECALL
File Format/Utility
Describes image, waveform, spreadsheet, and setup file formats and their utilities.
Save
Provides instructions for saving images, waveforms, and setups to internal memory or USB drives.
Recall
Explains how to recall default settings, waveforms, and setups from internal memory or files.
Reference Waveforms
Details how to recall and display reference waveforms, including navigation and editing options.
FILE UTILITIES
File Navigation
Explains how to navigate the file system, select files/directories, and set file paths.
Create Folder
Provides steps to create new directories within the file system for organizing files.
Delete File or Folder
Details the procedure for deleting files and folders from the oscilloscope's storage.
Copy File to USB
Explains how to copy files from internal memory to a connected USB drive.
Installing Optional Apps and Functions
Guides on installing optional applications and functions from a USB drive.
HARDCOPY
Printer I/O Configuration
Details how to configure the USB device port for connecting a PictBridge compatible printer.
Print Output
Explains how to print the oscilloscope display image using the configured printer.
Save - Hardcopy Key
Describes using the Hardcopy key to save screenshots, waveforms, or setups to memory or USB.
REMOTE CONTROL
Configure USB Interface
Provides steps for configuring the USB interface for remote control and installing drivers.
Configure the Ethernet Interface
Details Ethernet configuration for remote control, including IP address and DHCP settings.
Configure Socket Server
Explains how to set up the socket server for direct two-way communication over LAN.
USB Functionality Check
Guides on checking USB connectivity and verifying communication via a terminal application.
Socket Server Functionality Check
Details testing socket server functionality using National Instruments MAX software.
MAINTENANCE
How to use SPC function
Explains Signal Path Compensation (SPC) to optimize accuracy based on ambient temperature.
Vertical Accuracy Calibration
Provides instructions for performing vertical accuracy calibration on the oscilloscope channels.
Probe Compensation
Details the procedure for probe compensation to ensure accurate waveform measurements.
APPENDIX
FAQ
Frequently Asked Questions addressing common operational issues and troubleshooting.
Updating the Firmware
Guides on downloading and installing new firmware to update the oscilloscope's software.
SPECIFICATIONS
Lists the detailed technical specifications for the oscilloscope models and common features.
DIMENSIONS
Provides the physical dimensions of the oscilloscope unit for installation and reference.
Need help?
Do you have a question about the DCS-1102B and is the answer not in the manual?
Questions and answers