Denon RC-8000 Operating Instructions Manual page 7

• Denon AV receivers with one set of multi-room outputs can be operated with the M-ZONE 2 buttons.
About the CURSOR/PAGE button
When the CURSOR/PAGE button is pressed once, the display is highlighted. When the JOG stick is operated
while the display is highlighted, the cursor movement and enter remote control codes are sent.
When the CURSOR/PAGE button is pressed again, the display returns to normal and the mode switches back to
the normal page operation mode. The CURSOR/PAGE button can be operated when an AV amplifier, DVD player
or DBS receiver is selected.
2 DENON TUNER system buttons
The transmission codes of independent buttons are the same as for "AV AMP".
2 TV system buttons
The default setting is HITACHI 1. To change the specified brand, refer to "Changing the preset
memory of preset devices" on page 12.
Transmission codes
of independent buttons
CH• : Tuner preset
CHª : Tuner preset
VOL• : Main volume of AV amplifier
VOLª : Main volume of AV amplifier
MUTE : Muting of AV amplifier
Transmission codes
of independent buttons
CH• : TV channel
CHª : TV channel
VOL• : Main volume of AV amplifier
VOLª : Main volume of AV amplifier
MUTE : Muting of AV amplifier
ENGLISH
7