Denon RC-8000 Operating Instructions Manual page 37

ENGLISH
Connecting to Other Devices
Use the procedure described below to connect the RC-8001ST to a Denon device not equipped with a REMOTE IN
terminal or to other devices.
q Connect the included AC adapter to a wall power outlet, then connect the power cord to the RC-8001ST's DC IN
terminal.
w Connect a commercially available IR emitter (a Denon RC-618 for example) to the RC-8001ST's EMITTER terminal,
then place the IR emitter near the device's remote control receiver in a position in which reception is possible.
ANOTHER ROOM
Connecting Using a Denon RC-616
The following shows an example for controlling multiple devices using a Denon RC-616 powered emitter.
RC-8000
4
MULTI SOURCE AUDIO
signal cable
RC-8000
WIRED terminal
PARALLEL IN
RC-8001ST
MAIN ROOM
EMITTER
terminal
RC-618
RC-8001ST
terminal
RC-616
RC-618