Related Manuals for VacPak-It VMC16
Summarization of Contents
Control Panel (VMC10 /DPU /OP) Overview
Control Panel Indicators and Displays
Details the vacuum gauge, seal time, vac time lights, and LED display for monitoring.
Control Panel Operation Buttons
Explains the ON/OFF, Start, Seal, and Set buttons for machine control.
Control Panel Time Adjustment Buttons
Describes the Up/Down arrow buttons for adjusting vacuum and seal times.
Control Panel (VMC /16 /32) Operation
Control Panel Indicators and Displays
Details vacuum gauge, indicator lights (cooling, sealing, gas, vacuum), and LED display.
Control Panel Operation and Adjustment Buttons
Explains Set, Up/Down Arrow, and Stop buttons for machine control and adjustments.
Setup Instructions (VMC10/DPU/OP)
Adding Oil (VMC10DPU)
Procedure for adding oil to the vacuum pump, excluding VMC10DPU model.
Initial Setup Procedure
Steps for connecting power, releasing lid lock, and turning on the machine.
Adjusting Timing Controls
Guide to setting vacuum and sealing times using the control panel buttons.
Setup Instructions (VMC /16 /32)
Adding Oil (VMC /16 /32)
Procedure for adding oil to the vacuum pump for VMC/16/32 models.
Initial Setup Procedure
Steps for connecting power, releasing lid lock, and turning on the machine.
Adjusting Timing Controls
Guide to setting vacuum, sealing, and cooling times via the control panel.
Operating Instructions
Pouch Selection and Placement
Guidance on selecting pouches and placing items correctly in the chamber.
Vacuum and Sealing Process
Steps for closing the lid, initiating the vacuum cycle, and sealing.
Vacuum and Seal Quality Check
How to inspect and adjust for adequate vacuum and seal quality.
Maintenance Guide
Changing Vacuum Pump Oil
Procedure for changing the vacuum pump oil, including required supplies.
Routine Cleaning Procedures
Instructions for daily cleaning of the machine and its components.
Troubleshooting Common Issues
Unit Won't Turn On
Remedies for the machine not powering on or the LED screen not illuminating.
Achieving Complete Vacuum
Tips for ensuring a complete vacuum and addressing bag wrinkles.
Bag Loses Vacuum After Sealing
Solutions for bags losing vacuum, including checking for punctures and out-gassing.
Pouch Not Sealed Properly
Troubleshooting inadequate seals, including adjustments to sealing time.
Need help?
Do you have a question about the VMC16 and is the answer not in the manual?
Questions and answers