Related Manuals for Scotsman EH222 E
Summarization of Contents
Configuration Overview
Equipment Warranty Coverage
Details warranty coverage for the equipment.
System Component Identification
Describes ice making heads and condensing units.
Model Voltage Code Definitions
Explains voltage/hertz/phase codes for models.
Unit Specifications and Location
Location Limitations and Routing
Defines maximum distance, elevation, and line routing.
Model Number Identification Locations
Identifies where model and serial numbers are found.
Pre-Installation Requirements
Adapter and Tubing Kit Options
Lists available dispenser/bin adapters and tubing kits.
Essential Installation Components
Lists essential components for installation.
Ice Making Head Placement Notes
Notes on ice making section footprint and routing.
System Assembly and Setup
Tubing and Lineset Details
Details tubing types, kits, and lineset fitting options.
Unit Placement and Tubing Routing
Covers elevation limits, mounting, wiring, and tubing exposure.
Remote Condensing Unit Placement
Roof Preparation and Location Requirements
Requirements for roof mounting and unit placement.
Roof Penetration and Tubing Protection
Procedures for roof penetration and preventing tubing kinks.
Refrigerant Recovery and Evacuation Notice
Safety notice for refrigerant recovery and evacuation.
Ice Making Head Installation
Unit Attachment and Cable/Tubing Routing
Securing the head to adapters and routing cords/tubing.
Water and Drain Connectivity
Connecting water inlet and drain outlet.
Drain Outlet Configurations
Right-Side Drain Connection
Instructions for routing the drain to the right.
Left-Side Drain Connection
Instructions for routing the drain to the left.
Rear Drain Connection
Instructions for routing the drain to the back.
Electrical System Connections
Condensing Unit Wiring Details
Connecting control and power wires to the CU.
Ice Making Head Power Connection
Connecting the head's power cord to an outlet.
Three-Phase Electrical Guidelines
Specifics for three-phase connections.
Refrigeration Line Connections
Brazing Connections on Ice Head
Steps for brazing connections on the head.
Brazing Connections on Condensing Unit
Steps for brazing connections on the CU.
System Evacuation and Charging Procedure
Procedures for vacuuming and adding refrigerant.
Final Installation Steps
Securing the Ice Making Unit
Using clips to fasten the unit to its mount.
Pre-Startup Inspection Checklist
A list of checks before initial operation.
Controller Functions and Indicators
Component Indicator Light Explanations
Explains lights for various components.
Control Panel Display and Lights
Describes status, water, and de-scale lights.
Control Panel Push Buttons
Explains On, Off, Manual Harvest, and Clean buttons.
Ice Making Cycle Definitions
Describes Freeze and Harvest cycles.
Initial System Startup
Optional Pre-Startup Soak-Out Period
Optional process to warm compressor oil.
Step-by-Step Startup Instructions
Detailed instructions for powering on and initiating cycles.
Ice Thickness Adjustment Guidance
Checking and adjusting ice bridge thickness.
User Training and Warranty Registration
Instructing users and warranty registration.
Ice Thickness and Water Purge Adjustment
Ice Bridge Thickness Adjustment
Procedure for service technicians to modify ice thickness.
Water Purge Setting Configuration
Changing water purge parameters for different water types.
Ice Level Adjustment Control
Operation of Ice Level Control
How to set the point where ice production stops.
Ice Characteristics and Operating Noise
Describes ice formation and normal operating sounds.
Cleaning, Sanitation, and Maintenance
Scale Removal Procedure Steps
Steps to remove mineral scale from the water system.
Component Cleaning and Sanitization Process
Washing parts with cleaner and sanitizer.
Sanitizer Solution Mixing Instructions
Mixing the correct sanitizer solution.
Routine Maintenance Procedures
Washing Internal Components
Detailed washing of sensors, distributor, and interior.
Reassembly and Operation Restart
Putting parts back and resuming operation.
Remote Condenser Coil Cleaning
Instructions for cleaning the external condenser coil.
800 lb System Operational Data
800 lb Cycle Times and Pressures
Key operational parameters for the 800 lb system.
1000 lb System Operational Data
1000 lb Cycle Times and Pressures
Key operational parameters for the 1000 lb system.
Troubleshooting and Service Guide
Reasons for Automatic Shutdown
Lists issues that cause the machine to stop automatically.
Initial Troubleshooting Verification
Steps to verify before calling for service.
Machine Reset and Shutdown Instructions
How to manually reset or turn off the machine.
Need help?
Do you have a question about the EH222 E and is the answer not in the manual?
Questions and answers