Related Manuals for Rotex HybridCube
Summarization of Contents
Guarantee and conformity
Warranty conditions
Details the warranty conditions applicable to the ROTEX Sanicube / HybridCube products.
Safety
Observing instructions
Provides essential instructions for safe installation and maintenance by authorized personnel.
Warning signs and explanation of symbols
Explains the various warning signs and symbols used to indicate potential dangers and important information.
Avoid danger
Highlights risks associated with improper use and emphasizes safe operation practices.
Proper use
Defines the intended use of the ROTEX Sanicube / HybridCube as a hot water storage tank and prohibits misuse.
Instructions for operating safety
Outlines crucial safety measures before, during, and after installation and operation of the unit.
Product description
Design and components
Details the components and their arrangement within the ROTEX Sanicube / HybridCube storage tank.
High-performance hot water storage tank for heat pump systems
Illustrates connections and dimensions for unpressurised systems (DrainBack, p=0) of the HYC-DB types.
High-performance hot water storage tank for all heat sources, excluding low-temperature heat pumps
Details connections and dimensions for SC/SCS tanks used with various heat sources.
Brief description
Provides a concise overview of the ROTEX High-performance hot water storage tank's functionality and features.
Scope of delivery
Lists items included in the ROTEX Sanicube / HybridCube package, including the storage tank and accessories.
Optional accessories
Details optional accessories for enhancing ROTEX storage tank systems.
Set-up and installation
Set-up
Covers initial setup procedures for ROTEX Sanicube / HybridCube, including essential safety information.
Installation
Details critical safety information and general installation guidelines for connecting the unit.
Filling / Topping Up
Explains how to properly fill the storage tank and heat exchangers before initial start-up.
Start-up
Start-up
Guides the user through the initial start-up process, including a checklist for verifying installation steps.
Taking out of service
Temporary shutdown
Provides instructions for temporarily shutting down the heating system to prevent frost damage.
Draining the storage tank
Details procedures for safely draining water from the storage tank, including different connection types.
Draining the heating circuit and hot water circuit
Explains how to drain heating and hot water circuits using a suction lifter method.
Drain the solar panel circuit (only pressurised system)
Provides guidance on draining pressurised solar circuits, noting potential decomposition issues.
Final shutdown
Outlines final steps for disconnecting and dismantling the unit for disposal.
Hydraulic connection
Connection diagrams
Illustrates standard connection layouts for various system types, including heat pumps and condensing boilers.
Solution for low-temperature heat pumps
Illustrates connection layout for low-temperature heat pumps with drain-back solar support.
Solution for systems with high hot water demand
Depicts connection schematics for multiple storage tanks in large installations with high demand.
Solution for oil or gas condensing equipment
Shows connection diagrams for systems using condensing boilers and pressurized solar configurations.
Service and maintenance
Periodic Checks
Describes routine checks for water level and basic functions to ensure optimal operation.
Annual inspection
Outlines procedures for annual inspection, including functional checks and visual inspection of the unit.
Technical data
Basic data
Presents fundamental technical specifications for Sanicube (SC) models, including efficiency and dimensions.
Sanicube Solaris (SCS) Unpressurised (DrainBack)
Provides technical data for Sanicube Solaris (SCS) unpressurised models, covering system specifications.
Sanicube Solaris (SCS) Pressurised system
Presents technical data for Sanicube Solaris (SCS) pressurised models, detailing performance and connection data.
HybridCube (HYC) Unpressurised (DrainBack)
Lists technical specifications for HybridCube (HYC) unpressurised models, including performance data.
HybridCube (HYC) Pressurised system
Presents technical data for HybridCube (HYC) pressurised models, detailing performance and connection data.
Performance diagrams
Graphical data illustrating hot water performance and pressure drop characteristics for SC/SCS models.
HybridCube (HYC)
Presents performance diagrams for HybridCube (HYC) models, showing hot water output and pressure drop.
Tightening torque
Specifies recommended tightening torques for various connections and components of the ROTEX system.
Need help?
Do you have a question about the HybridCube and is the answer not in the manual?
Questions and answers