Related Manuals for Seppi MULTIFORST
Summarization of Contents
Preliminary Information
Symbols: Meaning and Use
Explains the meaning of Danger, Caution, and Warning symbols used in the manual.
Compliance with Standards
Lists the legislative standards and harmonised standards the machine complies with.
Manufacturer's Responsibility and Warranty
Details the terms of the manufacturer's responsibility and warranty limitations.
Safety and Accident Prevention
Operator Qualification
Specifies the requirements for operators to use the machine safely and effectively.
Safety Rules and Residual Risks
Outlines general safety rules and describes residual risks to be aware of during operation.
Stickers and Safety Labelling
Explains the pictograms and labels on the machine and their importance for safety.
Technical Information
Intended Use
Defines the machine's intended applications and prohibited uses.
Machine Models
Provides details on various stone crusher and forestry tiller models.
Safety Devices
Lists the safety features incorporated into the machines.
Handling and Commissioning
Handling, Lifting and Unloading
Instructions for safely handling, lifting, and unloading the machine.
Machine Application to Tractor
Steps for attaching the machine to a tractor, including linkage and PTO.
Hydraulic and Electrical Connections
Guide for connecting hydraulic quick couplings and electrical sockets.
Adjustments
3-Point Linkage and Hood Adjustments
Procedures for manually adjusting the 3-point linkage and hydraulic hood.
Skids, Roller, and Grader Blade Adjustments
Instructions for adjusting support skids, compacting roller, and grader blade.
Hydropneumatic Suspension and Anvil Adjustments
How to adjust hydropneumatic suspension and the machine's anvil.
Operation and Use
Pre-Operation Checks
Essential checks to perform before operating the machine.
Tractor Selection
Criteria for selecting suitable tractors for operation.
Start-up Procedures
Steps for starting the cooling system and the machine.
Processing Operations
Guidance on how to perform various processing tasks with the machine.
Safety Distances
Specifies mandatory safety distances to maintain during operation.
Maintenance
Belt Tension and Cogbelt Setting
Procedures for checking, adjusting belt tension, and setting cogbelts.
Lubrication and Oil Changes
Guidance on lubrication points, recommended oils, and oil change intervals.
Cooling System and Safety Device Checks
Maintenance for the cooling system and checks for safety devices.
Tool Replacement
Instructions for replacing swinging hammers and fixed knives.
Frame, Screw Checks, and Troubleshooting
Procedures for replacing anti-wear frames, checking screws, and troubleshooting.
Disabling and Storage
Stopping the Machine
Steps for stopping the machine correctly at the end of work or season.
Spare Parts and Records
Spare Parts
Information on using genuine spare parts and their warranty implications.
Control Register
Recommendation to maintain a control register for inspections and maintenance.
Disposal
Dismantling, Scrapping and Waste Disposal
Guidelines for the proper dismantling and disposal of the machine.
Need help?
Do you have a question about the MULTIFORST and is the answer not in the manual?
Questions and answers